Academic qualifications
o Ph. D. in
Experimental Solid State Physics "Structural, Mechanical and Optical
Properties of Some Transition Metal Oxides and Oxynitrides Thin Films"
(December, 2003), Physics Department, Faculty of Science, South Valley University,
Sohag, Egypt.
o
M. Sc. in Experimental Solid State Physics, “Some
of Physical Properties of Chalcogenide Ge-Sb-Se Alloy System” (January,
2000), Physics Department, Faculty of Science, South Valley University, Sohag,
Egypt.
o
B. Sc. in Physics, Very good with honors degree
(May, 1995), Physics Department, Faculty of Science, South Valley University,
Sohag, Egypt.
Main Research Interests
Fabrication and development of new metal oxide
nanowires
Fabrication and development of new optical
functional coatings of oxides and oxynitrides
Fabrication and development of low secondary
electron emission coatings
o
Characterization and optimization of the
deposited films of these new materials
o
Studying of the physical properties of these
new materials
a) Research
experience
Prof.
Dr. Sodky H. Mohamed has extensive experience in the design and characterization
of coatings, excellent knowledge about vacuum deposition systems and about thin
film compositional, structural, optical, electrical and thermal
characterization techniques. He has large experience in studying materials,
from bulk to nanoscale level. He has been working for several projects on thin
films and nanostructured materials for the past twenty years. He has
contributed significantly to the understanding and application of thin film
technology and characterization. During his stay at RWTH-Aachen, Germany, he had the opportunity to work with the
product research and development department of Interpane GMBH, Germany, a
market leader in architectural glass, for the development of optical
window coating materials by magnetron sputtering technique.
In
the last six years he achieved several projects on "Metal oxide nanowires: preparation,
characterization and application in gas&photo sensing and
Photocatalysts".
Prof. Dr. Sodky H. Mohamed has worked at nine
international laboratories for the past years and has been the recipient of
various prestigious awards such as DAAD (Germany), Fulbright (USA) and TEMPUS
(Spain).
Besides
his research Prof. Dr. Sodky H. Mohamed is doing several activities such
as (i) teaching some theoretical courses for undergraduate students, (ii)
taking part in undergraduate students' laboratories and guiding the
demonstrators to prepare and fix simple experiments for undergraduate students,
(iii) leading the under graduate students in their projects in the last year (iv)
supervising some postgraduate students in their research. Prof. Dr. Sodky H.
Mohamed is supervising two M.Sc. students and one Ph. D. student.
The specific skills of the
researcher include project
management of multiple research and development (R&D) projects, surface
coating manufacturing techniques such as sputtering, electron beam evaporation,
ion implantation and RF plasma surface treatment techniques; and nanostructured
materials preparation techniques such as vapor transport technique. The researcher
is skillful in using structural characterization techniques such as XRD, SEM
and X-ray reflectometry (XRR); chemical analytical techniques including XPS,
EDX, SIMS and RBS; surface morphology techniques such as SEM, TEM and AFM;
optical characterization techniques such as photospectrometers and variable
angle spectroscopic ellipsometers; electrical measurements tools such as
four-point probe and two terminal configurations; mechanical characterization
techniques such as wafer curvature apparatus; and surface topography and
roughness determination techniques such as AFM and XRR.
rd
آخر الأبحاث العلمية
- 1. M. A. Awad, S. H. Mohamed, S. A. Mohamed, Electrical resistivity and magnetic susceptibility of substoichiometric CdO and In doped CdO flms, Appl. Phys. A 127 (2021) 343 (8pp).
2. S. H. Mohamed, M. A. Awad, M. I. Hafez, N. M. A. Hadia, Change in properties upon thermal treatment of copper sulfide powder and thin films, Bull. Mater. Sci. 44 (2021) 81(11pp).
3. F.M. El-Hossary, S. H. Mohamed,E.A. Noureldein, M. Abo EL-Kassem, ZnO thin films prepared by rf plasma chemical vapor transport for self-cleaning and transparent conducting coatings, Bull. Mater. Sci. 44 (2021) 82 (13pp).
4. S.H. Mohamed, M. T. Khan, A. Almohammedi, M. A. Awad, Synthesis, structural and photophysical properties of mixed Zn:SnO2 nanowires, Mater. Sci. Semicond. Proc. Mater. Sci. Semicond. Proc. 1234 (2021) 105573.
5. E.M.M. Ibrahim, G.A. Ahmed, V. Khavrus, N.M.A Hadia, S. H. Mohamed,
S. Hampel, A.M. Adam, Effect of surfactant concentration on the morphology and thermoelectric power factor of PbTe nanostructures prepared by a hydrothermal route, Physica E 125 (2021) 114396 (6pp).
6. E. M. M. IbrahimG. A. Ahmed, V. Khavrus, N. M. Hadia, S. H. Mohamed, S. Hampel, A.M. Adam, Tailoring the thermoelectric properties of Pb1-xSmxTe nanostructures via Sm doping, Intermetallics 125 (2020) 106923.
7. F.M. El-Hossary, S. H. Mohamed, E.A. Noureldein, M. Abo EL-Kassem, Influence of rf power on growth, structural and optical properties of ZnO synthesized via vapor transport in inductively coupled plasma, Mater. Sci. Semicond. Proc. 120 (2020) 105284 (9pp).
8. A.M. AbdEl‑Rahman, S.H. Mohamed, Properties of SnO2 and SnO2−xNx grown on the boat walls using vapor transport method, Applied Physics A 126 (2020) 457 (8pp).
9. M. S. Alqahtani, S.H. Mohamed, Z.A. Alrowaili, N. M. A. Hadia, Ellipsometric evaluation and morphology of mixed zinc sulfide/zinc oxide and zinc oxide nanostructures synthesized at various temperatures, Can. J. Phys. 98 (2020) 689-694.
10. A. M. Abd El-Rahman, S. H. Mohamed, Preparation and characterization of nanostructured titanium oxynitride films for the application in self-cleaning and photoelectrochemical water splitting, Thin Solid Films 698 (2020) 137864 (10pp).
11. S. H. Mohamed, H. Zhao, H. Romanus, F.M. El-Hossary, M. Abo EL-Kassem, M.A. Awad, M. Rabia, Yong Lei, Optical, water splitting and wettability of titanium nitride/titanium oxynitride bilayer films for hydrogen generation and solar cells applications, Mater. Sci. Semicond. Proc. 105 (2020) 104704 (7pp).
12. M. Rabia, S. H. Mohamed, H. Zhao, M. Shaban, Y. Lei, A. M. Ahmed, TiO2/TiOxNY hollow mushrooms‑like nanocomposite photoanode for hydrogen electrogeneration, J. Porous Mater.27 (2020) 329.
1.
2.
S. H. Mohamed, H. Zhao, H. Romanus, F.M.
El-Hossary, M. Abo EL-Kassem, M.A. Awad, M. Rabia, Yong Lei, Optical, water splitting and
wettability of titanium nitride/titanium oxynitride bilayer films for hydrogen
generation and solar cells applications, Mater. Sci. Semicond. Proc.
105 (2020) 104704
(7pp).
3.
M. S. Alqahtani, N. M. A. Hadia, S. H. Mohamed,
Tuning the
optical, electrical resistivity and structural properties of DC magnetron
sputtered aluminum zinc oxide films by changing the oxygen flow rate, Appl. Phys.
A 125 (2019) 776.
4.
S.
H. Mohamed, N. M. A. Hadia, M. A. Awad, M. I. Hafez, Study of
the effects of both film thickness and annealing time on CuxSyOz
thin films for the possibility of usage as solar control coatings, Applied Physics A 125 (2019) 587 (10pp).
5.
S. H. Mohamed, N. M. A. Hadia, M. A. Awad
and Essam R. Shaaban, Effects of thickness and Ag layer addition on the
properties of ZnS thin films, Acta Physica Polonica 135 (2019) 420-425.
6.
A. H. Aly, A. A.
Ameen, H. A. Elsayed, S. H. Mohamed, M. R. Singh, One-Dimensional
Metallo-Superconductor Photonic Crystals as a Smart Window, J. Supercond. Nov.
Magn. 32 (2019) 2313–2318.
7.
A. H. Aly, A. A.
Ameen, H. A. ElSayed, S. H. Mohamed, Photonic crystal defective
superconductor and black body radiations, Opt. Quant. Electron. 50 (2018) 361.
8.
M. S. Alqahtani,
N.M.A. Hadia, S.H. Mohamed, Controlled synthesis, morphological,
optical and electrical properties of copper-doped zinc oxysulfide
nanostructures, Appl. Phys. A 124 (2018) 617 (8pp).
9.
M. S. Alqahtani,
N.M.A. Hadia, S.H. Mohamed, Effect of oxidation time on
structural, optical and electrical properties of mixed copper oxides
nanocrystallites, Optik 173 (2018) 101–109.
10. S. H. Mohamed, Kh. M. Al‑Mokhtar, Characterization of Cu2O/CuO
nanowire arrays synthesized by thermal method at various temperatures, Appl.
Phys. A 124 (2018) 493 (8pp).
11. N. M. A.
Hadia, M.F. Hasaneen, Mohamed Asran Hassan, S. H. Mohamed, Effect
of the carrier gas on morphological, optical and electrical properties of SnO2
nanostructures prepared by vapor transport, J. Mater. Sci. - Mater.
Electron. 29 (2018)
4155–4162.
12. S. H.
Mohamed, N.
M. A. Hadia, M.F. Hasaneen, M. A. Hassan, Morphologies
and optical properties of mixed tin oxysulfide produced by evaporation condensation of
SnS, Mater. Sci. Semicond. Proc. 72 (2017) 72 – 77.
13. M. S. Alqahtani, N.M.A. Hadia, S.H. Mohamed,
Effects of V doping on magnetic and optical properties of oxygen-deficient In2O3
thin films, Optik 145 (2017) 377–386.
14. Arafa H. Aly, Hussein A. Elsayed, Ayman A. Ameeny
and S. H. Mohamed, Tunable properties of one-dimensional photonic
crystals that incorporate a defect layer of a magnetized plasma, Int. J. Mod.
Phys. B 31 (2017) 1750239 (9 pages).
15. M. Raaif
and S. H. Mohamed, The effect of Cu on the properties of
CdO/Cu/CdO multilayer films for transparent conductive electrodes
applications,
Appl. Phys. A 123 (2017) 441 (7pp).
16. M. S.
Alqahtani, N.M.A. Hadia, S. H. Mohamed, Synthesis, optical, structural,
and electrical properties of single-crystalline CdS nanobelts, Appl.
Phys. A 123 (2017)
298 (9 pp).
17. N. M. A. Hadia,
M. A. Awad, S. H. Mohamed, E. M. M. Ibrahim, Optical
and electrical properties of hydrothermally prepared CdTe nanowires, Appl.
Phys. A 122 (2016) 889 (6pp).
18. S.
A. Saleh, A. A. Ibrahim, S.
H. Mohamed, Structural and optical properties of nanostructured
Fe-doped SnO2, Acta Phys. Pol.
A 129 (2016) 1220-1225.
19. D. Prakash, E.R. Shaaban, M. Shapaan, S.H. Mohamed, A.A. Othman,
K.D. Verm, Thickness-dependent dispersion parameters, energy gap and nonlinear
refractive index of ZnSe thin films, Mater. Res. Bull. 80 (2016) 120–126.
20. N.M.A. Hadia, Mohammed S. Alqahtani, S. H. Mohamed, WO3
nanowires for optoelectronic and gas
sensing applications, Appl. Phys. A 119 (2015) 1261–1267.
21. S. H. Mohamed,
N. M. A. Hadia, H. M. Ali, Effect of annealing on properties of decorative
zirconium oxynitride thin films, Eur.
Phys. J. Appl. Phys. 69 (2015) 30301(6p).
22. N.M.A.
Hadia, Santiago García-Granda, José R. García, D. Martínez-Blanco, S.H. Mohamed, Morphological
and magnetic properties of the hydrothermally prepared α-Fe2O3
nanorods, Mater. Chem. Phys. 147 (2014) 1037-1041.
23. S. H.
Mohamed, N.M.A. Hadia, A.K. Diab and A.M. Abdel Hakeem, Synthesis, photoluminescence and optical constants evaluations of
ultralong CdO nanowires prepared by vapor transport method, J.
Alloys Compd. 609 ( 2014) 68-72.
24. S. H.
Mohamed and
M. El-Hagary, Towards understanding the nanomaterials characteristics of vapor
transported CdS in an open end tube, Mater. Chem. Phys. 143 (2013)
178-183.
25. S. H.
Mohamed, M.
El-Hagary, M. Emam-Ismail, Synthesis and
ellipsometric investigations of copper doped zinc oxide, and copper oxide/zinc oxide
nanowires, J. Adv. Microsc. Res.
8 (2013) 179-185.
26. S. H.
Mohamed, I.
B.I. Tomsah, M. El-Hagary, Optical and structural properties of catalyst-free
synthesized leaves like CdS films, Optoelectron. Adv. Mater. – Rapid Commun.
7 (2013) 485-489.
27.
Z. H. Dughaish and S. H. Mohamed,
Evaluation of optical constants of Tl4PbTe3 thin films
with different thicknesses, Indian J. Phys. 87 (2013) pp 741-746.
28. S.
H. Mohamed,
Transparent Conductive Gallium-doped Indium Oxide Nanowires for Optoelectronic Applications,
J. Korean Phys, Soc, 62 (2013) 902–905.
29. M. Raaif,
S. H. Mohamed, A.M. Abed El-Rahman and A. Kolitsch, Structural,
mechanical and optical properties of nitrogen-implanted titanium at different
pulse frequency, Eur. Phys. J. Appl. Phys. 62 (2013) 10802 (9 pages).
30. H. Howari
and S. H. Mohamed, Synthesis, structural and ellipsometric evaluation of
V2O5 nanowires, J. Phys. Chem. Solids 74 (2013)
630–634.
31. A. M.
Ahmed, M. M. Wakkad, S. H. Mohamed, A. K. Diab, Effect of Composition on
Transport Properties of Ge10AsxTe90-x
Chalcogenide System, Indian J. Phys. 87 (2013) 317–323.
32. S. H.
Mohamed, M.
El-Hagary, S. Althoyaib, Growth
of undoped and Fe doped TiO2 nanostructures and their optical and
photocatalytic properties, Appl. Phys. A 111
(2013) 1207–1212.
33. S. H.
Mohamed, M
El-Hagary, A. S. Radwan, Preparation and characterization of mixed
iron-titanium oxide nanostructure, Indian J. Phys. 87 (2013) 223-228.
34. S. H. Mohamed, M. El-Hagary, S. Althoyaib, Growth of β-Ga2O3
nanowires and their photocatalytic and optical properties using Pt as a catalyst, J.
Alloys Compd. 537 (2012) 291–296.
35. S. H. Mohamed, M. El-Hagary, S. Althoyaib, Photocatalytic and optical properties of
nanocomposite TiO2-ZnO thin films, Eur. Phys. J. Appl. Phys. 57 (2012) 20301 (6pp).
36. S. H. Mohamed and
Z. H. Dughaish, Microstructural and optical investigations of
Ce-doped barium titanate thin films by FTIR and spectroscopic ellipsometry, Phil. Mag. 92 (2012) 1212-1222.
37. S. H.
Mohamed, M.
Raaif and A. M. Abd El-Rahman, Physical properties of thermally evaporated silicon
films nitrided at different rf plasma-processing time, J. Mater. Sci. 47 (2012) 2875–2881.
38. A.M. Abed
El-Rahman, M. Raaif, S. H. Mohamed, A. Kolitsch, Mechanical and
ellipsometry measurements of thin TiN layer prepared by PIII, Mater.
Chem. Phys. 132 (2012) 91– 95.
39. S. H.
Mohamed, SnO2
dendrites-nanowires for optoelectronic and gas sensing applications, J.
Alloys Compd. 510 (2012) 119– 124.
40. Essam R.
Shaaban and S. H.
Mohamed, Thermal stability and crystallization kinetics of
Pb and Bi borate-based glasses, J. Therm. Anal. Calorim. 107 (2012) 617–624.
41. S. H. Mohamed and
E. R. Shaaban, Microstructural, optical and photocatalytic properties of CdS
doped TiO2 thin films, Physica B 406 (2011) 4327-4331.
42. S. H.
Mohamed, Synthesis, structural and
ellipsometric evaluation of oxygen-deficient and nearly stoichiometric zinc
oxide and indium oxide nanowires/nanoparticles, Phil. Mag. 91 (2011) 3598-3612.
43. S. H.
Mohamed, M.
Raaif, A. M. Abd El-Rahman and Essam R. Shaaban, Properties
of Rf Plasma Nitrided Silicon Thin Films at Different Rf Plasma Processing
Powers, Acta
Phys. Pol. A 120 (2011) 552-557.
44. S. H. Mohamed, H. A. Mohamed and H. A. Abd El Ghani, Development of structural and optical properties of
WOx films upon increasing oxygen partial pressure during reactive
sputtering, Physica
B 406 (2011) 831–835.
45. S. H. Mohamed and
H. M. Ali, "Structural, optical and photoluminescence
characterization of electron beam evaporated ZnS/CdSe nanoparticles thin films", J. Appl. Phys. 109 (2011) 013108 (5pp).
46. S. H
Mohamed,
FTIR and spectroscopic ellipsometry investigations of the electron beam
evaporated silicon oxynitride thin films, Physica B 406 (2011)
211–215.
47.
S. H. Mohamed and M. Raaif, Effects of thickness and rf
plasma oxidizing on structural and optical properties of SiOxNy thin films, Surf. Coat. Technol. 205
(2010) 525–532.
48. M.
El-Hagary, M. Emam-Ismail, S. H. Mohamed, A. S. Hamid, S. Althoyaib, Structural
and optical analysis of nanocrystalline thin films of mixed rare earth oxides
(Y1-xErx)2O3 Thin Solid Films 518
(2010) 4058–4065.
49. S. H. Mohamed and E. R. Shaaban,
Investigation of the refractive index and dispersion parameters of tungsten
oxynitride thin films, Mater. Chem. Phys. 121
(2010) 249–253.
50. S. H.
Mohamed, M.
El-Hagary, M. Emam-Ismail, Thickness and annealing effects on the
opto-electronic properties of ZnS films, J. Phys. D: Appl. Phys. 43
(2010) 075401 (7pp).
51. S. H. Mohamed,
Photocatalytic, optical and electrical properties of copper-doped zinc sulphide thin films, J.
Phys. D: Appl. Phys. 43 (2010) 035406 (8pp).
52. S. H.
Mohamed, F.
M. El-Hossary, G. A.Gamal, M. M. Kahlid, Optical Properties of Plasma Deposited
Amorphous Carbon Nitride Films on Polymer Substrates, Physica
B 405 (2010) 254–257.
53. S. H.
Mohamed, M.
El-Hagary, M. Emam-Ismail, Investigations of transparent conductive Y-doped ZnO
thin films prepared by electron beam evaporation, J. Nat.
Sci. Math. 3 (2009) 97-106.
54. E. R.
Shaaban, I. Kansal, S. H. Mohamed and J.M.F. Ferreira, Microstructural
parameters and optical constants of ZnTe thin films with various thicknesses, Physica
B 404(2009) 3571–3576.
55. S. A.
Ahmed and S. H. Mohamed, Density of states effective mass of SnBi4Se7
deduced from the temperature dependence of electrical conductivity in the
activation regime, J. Mater. Sci. 44 (2009) 3043–3048.
56. A. M. Abd
El-Rahman, S. H. Mohamed, M. R. Ahmed, E. Richter, F. Prokert, Nitrocarburizing of AISI-304
stainless steel using high voltage plasma immersion ion implantation, Nucl. Instrum. Methods Phys. Res., Sect. B
267 (2009) 1792-1796.
57. S. H.
Mohamed, F.
M. El-Hossary, G. A.Gamal, M. M. Kahlid, Properties of indium tin oxide thin
films deposited on polymer substrates, Acta Phys. Pol. A 115 (2009) 704-708.
58. S. H.
Mohamed and
S. A. Ahmed, Ellipsometrically determination of the optical constants of ZnO in
ZnO/Ag/ZnO multilayer system, Eur. Phys. J. Appl. Phys. 44 (2008) 137-141.
59. S. H.
Mohamed “Effects
of Ag layer and ZnO top layer thicknesses on the physical properties of
ZnO/Ag/ZnO multilayer system” J. Phys. Chem. Solids 69
(2008) 2378–2384.
60. S. H.
Mohamed
“Thermal stability of tungsten nitride films deposited by reactive magnetron
sputtering” Surf. Coat. Technol. 202 (2008) 2169-2175.
61. S. H.
Mohamed, A.
M. Abd El-Rahman, Mahrous R. Ahmed “Investigation of zirconium
oxynitride thin films deposited by reactive pulsed magnetron sputtering” J.
Phys. D: Appl. Phys. 40 (2007) 7057-7062.
62. S. H. Mohamed, A. Anders, I. Montero, L.Galán
“Structural and optical evaluation of WOxNy films
deposited by reactive magnetron sputtering" J. Phys. Chem. Solids 68
(2007) 2227-2232.
63. I.
Montero, S. H. Mohamed, M. García, L.Galán and D. Raboso “Effect
of surface reactions of low-energy carbon ions on the secondary electron
emission of TiN:O thin films” J. Appl. Phys. 101 (2007) 113306.
64. S. H. Mohamed and
A. Anders, “Physical properties of Er implanted tungsten oxide films deposited
by reactive dual magnetron sputtering” Thin Solid Films 515 (2007) 5264-5269.
65. S. H.
Mohamed and S.
Venkataraj “Thermal
stability of amorphous molybdenum trioxide films prepared at different oxygen
partial pressures by reactive DC magnetron sputtering” Vacuum 81 (2007)
636-643.
66. S. H.
Mohamed and A. Anders “Structural,
optical and electrical properties of WOx(N)y films
deposited by reactive dual magnetron sputtering” Surf. Coat. Technol. 201
(2006) 2977-2983.
67.
S. H. Mohamed, A. M. Abd El-Rahman, A. M.
Salem, L. Pichon, F. M. El-Hossary “Effect of rf plasma
nitriding time on electrical and opticalproperties of ZnO thin films” J. Phys. Chem. Solids 67
(2006) 2351-2357.
68. S. H. Mohamed, M. M. Wakkad, A. M. Ahmed
and A. K. Diab “Structural and optical properties of Ge-As-Te
thin films”
Eur. Phys. J. Appl. Phys. 34 (2006) 165-171.
69.
H. A. Mohamed, H.
M. Ali, S. H.
Mohamed, and M. M. Abd El-Raheem “Transparent conducting
ZnO-CdO thin films deposited by e-beam evaporation” Eur. Phys. J. Appl.
Phys. 34 (2006) 7-12.
70. S. H. Mohamed and R. Drese “Structural and
optical properties of direct current sputtered zinc aluminum oxides with a high
Al concentration” Thin Solid Films 513 (2006) 64-71.
71. S.
Venkataraj, D. Severin, S. H. Mohamed, J. Ngaruiya, O. Kappertz and M. Wuttig “Towards understanding the superior
properties of transition metal oxynitrides prepared by reactive DC magnetron sputtering”
Thin Solid Films 502 (2006) 228-234.
72. S. H.
Mohamed “Structural and electro-optical
characteristics of Ga-doped ZnO films prepared by thermal oxidation of metallic
Zn100-xGax films” Phys. Stat. Sol. (a) 202 (2005)
1948-1958.
73. S. H.
Mohamed, H.
M. Ali, H. A.
Mohamed and A. M. Salem “Effect of annealing and In content on the
properties of electron beam evaporated ZnO films” Eur. Phys. J. Appl. Phys. 31
(2005) 95-99.
74. H. M.
Ali, H.A. Mohamed and S. H. Mohamed “Enhancement of the optical and
electrical properties of ITO thin films deposited by electron beam evaporation
technique” Eur. Phys. J. Appl. Phys. 31 (2005) 87-93.
75. S. H. Mohamed, O.
Kappertz, T.
Niemeier, R. Drese, M. M. Wakkad and M. Wuttig “Effect of heat
treatment on properties of TiOxNy thin films” Thin
Solid Films 468 (2004) 48-56.
76. J. M. Ngaruiya, O. Kappertz, S. H.
Mohamed and
M. Wuttig “Structural formation upon reactive magnetron sputtering of
transition metal oxides films” Appl. Phys. Lett. 85 (2004) 748-750.
77. S. H. Mohamed, O. Kappertz, J. M. Ngaruiya, T. Niemeier, R. Drese, R.
Detemple, M. M. Wakkad and M. Wuttig “Influence of nitrogen content on
properties of direct current sputtered TiOxNy films” Phys.
Stat. Sol. (a) 201 (2004) 90-102.
78. X. Liu, S.
H. Mohamed, J. M. Ngaruiya, M. Wuttig and T. Michely “Modifying the growth
of organic thin films by a self-assembled monolayer” J. Appl. Phys. 93
(2003) 4853-4855. Also, it was selected for the April 14, 2003 issue
of the Virtual Journal of Nanscale Science & Technology.
79. S. H. Mohamed, O. Kappertz, T. P. Leervad
Pedersen, R. Drese and M. Wuttig “Properties of TiOx coatings
prepared by dc magnetron sputtering” Phys. Stat. Sol. (a) 198 (2003) 224-237.
80. S. H.
Mohamed, O.
Kappertz, J. M. Ngaruiya, T. P. Leervad Pedersen, R. Drese and M. Wuttig
“Correlation between structure, stress and optical properties in direct current
sputtered molybdenum oxide films” Thin Solid Films 429 (2003) 135-143.
81. M. M.
Wakkad, E. Kh. Shokr and S. H. Mohamed “Crystallization kinetics and
some physical properties of as-prepared and annealed Ge-Sb-Se chalcogenide
glasses” Phys. Stat. Sol. (a) 183 (2001) 399-411.
82. M. M. Wakkad, E. Kh. Shokr and
S. H. Mohamed “Optical and calorimetric study of Ge-Sb-Se glasses” J.
Non-Cryst. Solids 265 (2000) 157-166.
b) Research
results
The research deliverables from the researcher's
research activities include 88 refereed journal papers, 13 papers presented in refereed conferences, 1 presented in a work shop, 4
more publications under review or in the pipeline,
Awards and honours
o
Honoring the scientific
excellence from Sohag University in the first science day 2018.
o
Sohag University Award for
Scientific Excellence 2014-2015
o
The Qassim University
(K.S.A.) prize for the beast research paper in applied researches in honor of
the paper entitled "Thickness and annealing effects on the optoelectronic properties of ZnS
films, 1430/2009.
o
TWAS young affiliate
2007-2011.
Scholarships
v DAAD Re-invitation Program visiting professor (Jun 20, 2018-September 19, 2018), Institut für Physik
Fachgebiet/Fachgebiet Angewante Nanophysik, Fakultät für Mathematik und Naturwissenschaften, Technische Universität Ilmenau,
Germany.
v MEDASTAR visiting professor (October 1, 2014-October 31, 2014) Inst. for Sensor and Information Systems,
Dept. Electrical and Information Engineering, Karlsruhe University of Applied
Sciences, German
v TEMPUS training grant (July, 2006 – August, 2006) Departamento
de Fisica e Ingenieria de Superficies, Instituto de Ciencia de Materiales de
Madrid, Consejo Superior de Investigaciones Cientificas Cantoblanco, Madrid,
Spain.
v Fulbright fellowship (November, 2005 – April, 2006) Lawrence Berkeley National
Laboratory, California, USA.
v DAAD scholarship (Jun, 20001 – September, 2003) I. Physikalisches Institut (1A) der RWTH Aachen, Germany.
¥ Research project (no. 191 of the 11th Takamul programs of the academic year 1441-1442 AH) from Deanship of Scientific research at Islamic University of Madinah, Saudi Arabia. Title: Synthesis and characterizations of mixed Zn:SnO2 nanowires for optoelectronic applications, S. H. Mohamed, Mohd Taukeer Khan. Budget: 23,000 SR.