1.      Essam R. I. Mahmoud: Enhancement of the tribological performance of Pure Titanium (CP-Ti) through YAG laser technique, Indian Journal of Science and Technology, SN Publishers, Volume: 13, Issue: 46, Pages: 4555-4563, 2020.

 DOI: 10.17485/IJST/v13i46.1858

 

2.      Essam R. I. Mahmoud, Ali Algahtani, Sohaib Z. Khan, and Gulam Mohammed Sayeed Ahmed: Characterizations of Cladded 6082-T6 Aluminum Alloy Through Hard Anodizing, Science of Advanced Materials, Vol. 12, pp. 1–12, 2020. doi:10.1166/sam.2020.3758

 

3.      Vineet Tirth, Mohammed Abdel Ghani Elkotb, Irfan Anjum Badruddin, Essam R.I. Mahmoud, Saiful Islam, Baha M. Kamel: Effect of pressure on ageing response of (SiC + Al2O3)/6063 composites, Journal of Materials Research and Technology. 2020; 9(5):11834–11848, ttps://doi.org/10.1016/j.jmrt.2020.08.047

 

4.      Essam R.I. Mahmoud, Sohaib Z. Khan , Muhammad Ejaz: Laser surface cladding of mild steel with 316L stainless steel for anti-corrosion applications, Materials Today: Proceedings, 2020, https://doi.org/10.1016/j.matpr.2020.04.763

 

5.      Sohaib Z. Khan, Farrukh Mustahsan, Essam R.I. Mahmoud, S.H. Masood: novel modified re-entrant honeycomb structure to enhance the auxetic behavior: Analytical and numerical study by FEA, Materials Today: Proceedings, 2020, https://doi.org/10.1016/j.matpr.2020.05.083

 

6.      Essam R. I. Mahmoud, Ali Algahtani,Vineet Tirth: Study on Microstructure Characterisation of Three Different Surface Coating Techniques on 6082‑T6 Aluminum Alloy, Metals and Materials International, July, 2020, https://doi.org/10.1007/s12540-020-00825-3

 

7.       Muhammad Ejaz, Essam R.I. Mahmoud, Sohaib Z. Khan: The investigation of the fatigue failure of nickel-based superalloy718 choke valve stems used in offshore subsea water injection Service, Engineering Failure Analysis 110 (2020) 104434. https://doi.org/10.1016/j.engfailanal.2020.104434

 

8.      Vineet Tirth , Ram Karan Singh, Saiful Islam, Irfan Anjum Badruddin, Rini Asnida Binti Abdullah, Ali Algahtani , Essam R.I. Mahmoud: Kharif Crops Selection for Sustainable Farming Practices in the Rajasthan-India Using Multiple Attribute-Based Decision-Making, Agronomy 2020, 10, 536; doi:10.3390/agronomy10040536

 

9.      EssamR I Mahmoud, Vineet Tirth, Ali Algahtani and Sohaib Z Khan: Microstructural characterization of different metal matrix composite claddings reinforced by TiC through YAG laser cladding, Materials Research Express 7 (2020) 066407 https://doi.org/10.1088/2053-1591/ab9bc4

 

10.  Essam R.I. Mahmoud, Ali Algahtani: Erosion and corrosion resistance of plasma electrolytic oxidized 6082 aluminum alloy surface at low and high temperatures, Journal of Materials Research and technology 2019, 8(3): 2699-2709. https://doi.org/10.1016/j.jmrt.2019.02.017

 

 

11.  Essam R.I. Mahmoud and Ali Algahtani: Tribo-corrosion Performance of Plasma Sprayed Al2O3 on Aluminum Alloy for Thermal Barrier Coatings, Materials Express Journal, Vol. 8, No. 6, 2018, pp. 475-488. doi:10.1166/mex.2018.1464

 

12.  Ali Algahtani, Essam R.I. Mahmoud, Sohaib Z. Khan and Vineet Tirth: Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy, Processes 2018, 6, 240; doi:10.3390/pr6120240

 

13.  Sohaib Z. Khan, S. H. Masood, Essam Ibrahim & Zaini Ahmad: Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling, Virtual and Physical Prototyping 10.1080/17452759.2019.1615750

 

14.  Essam R.I. Mahmoud, Ali Algahtani, Sohaib Z. Khan and Vineet Tirth: “Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy”, Processes Journal, 2018, 6, 240; doi:10.3390/pr6120240.

 

15.  Vineet Tirth, Ali Algahtani, and Essam R. I. Mahmoud: “Tribological characterization of stir cast 2218 alloy-5%-alumina-titania hybrid microcomposites developed by liquid forging”, Materials Express Journal, Vol. 8, No. 6, 2018, pp. 475-488. doi:10.1166/mex.2018.1464.

 

16.  Gulam Mohammed Sayeed Ahmed, Ali Algahtani, Essam R. I. Mahmoud and Irfan Anjum Badruddin: “Experimental Evaluation of Interfacial Surface Cracks in Friction Welded Dissimilar Metals through Image Segmentation Technique (IST)”, Materials Journal, 2018, 11, 2460; doi:10.3390/ma11122460.

 

 

17.  Mahmoud M. Tash and Essam R. I. Mahmoud: “Development of in-Situ Al-Si/CuAl2 Metal Matrix Composites: Microstructure, Hardness, and Wear Behavior”, Materials 2016, 9, 442; doi:10.3390/ma9060442

 

18.  Hashem F. El-Labban, Essam R.I. Mahmoud and Ali Alqahtani: “Microstructure, wear and corrosion characteristics of TiC-laser surface cladding on low carbon steel”, Metallurgical and Materials Transactions B, Volume 47, Issue 2, 2016, PP. 974-982. DOI: 10.1007/s11663-016-0602-4

 

19.  Essam R.I. Mahmoud and Ali Al-Khozaim: “Fabrication of In-Situ Al-Cu Intermetallics on Aluminum Surface by Friction Stir Processing”, Arabian Journal for Science and Engineering, Springer publication, Vol. 41, No. 5 (2016), pp. 1757-1769. DOI: 10.1007/s13369-015-1889-1.     ISSN 1319-8025

 

20.  Essam R. I. Mahmoud and Mahmoud M. Tash: “Magnetization of Aluminum Surface through Friction Stir Processing”, Materials Journal, 2016, 9, 505; doi:10.3390/ma9070505

 

21.  Hashem F. El-Labban, M. Abdelaziz, and Essam R.I. Mahmoud: “Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al2O3 particles”,  Journal of King Saud University – Engineering Sciences, Elsevier Publication, Volume 28, Issue 2, July 2016, Pages 230–239.   doi.org/10.1016/j.jksues.2014.04.002.

 

 

22.  Hashem F. El-Labban and Essam R.I. Mahmoud: “Welding of AA 6028 Aluminum Alloy and Its Nanocomposite Using Different Filler Materials”, Materials Transactions, Vol. 56, No. 1 (2015) pp. 113 – 119.

1.      doi:10.2320/matertrans.M2014283.

 

23.  Hashem F. El-Labban and Essam R.I. Mahmoud:  “Modification of microstructures for hypoeutectic, eutectic and hypereutectic Al–Cu binary alloys”, International Journal of Cast Metals Research, Vol. 28, No. 2 (2015) pp. 81 – 88.

1.      DOI 10.1179/1743133614Y.0000000136.

 

24.  Essam R. I. Mahmoud: “Formation of VC- composites surface layers on spheroidized graphite cast iron by laser surface cladding process”, International Journal of Engineering Science and Technology (IJEST), 7 (1) (2015), pp. 46-54.

 

25.  Hashem F. El-Labban, Essam R.I. Mahmoud and Hussein Al-Wadai: “Formation of VC- Composite Surface layer on High C-Cr Bearing Tool Steel by Laser Surface Cladding”, Journal of Manufacturing Processes, Volume 20, Part 1, October 2015, Pages 190-197. doi:10.1016/j.jmapro.2015.08.004

 

26.  Essam R.I. Mahmoud; “Microstructure, wear and corrosion characteristics of 304 stainless steel laser cladded with titanium carbide”, Advances in Production Engineering & Management, Vol. 10,  No. 3, Sept.,2015, pp 115–124.

1.       http://dx.doi.org/10.14743/apem2015.3.196 

 

27.  Essam R.I. Mahmoud: "Microstructure, Wear and Corrosion Characteristics of 304 stainless steel laser cladded with titanium carbide”, International Journal of Engineering Research and Technology, Vol. 4, Issue 8, 2015, pp. 422-427.

 

28.  Essam R.I. Mahmoud and Ali Algahtani: " Effect of fiber YAG laser parameters on the microstructural and mechanical properties of high strength low alloy steel", International Journal of Materials Engineering, 5(5), 2015, pp.113-120

1.      DOI: 10.5923/j.ijme.20150505.02

 

29.  Essam R.I. Mahmoud, M. Abdelaziz and Hashem F. El-Labban: “Fabrication of Magnetic Polymer Matrix Composites by Friction Stir Processing”, Umm Al-Qura Univ. J. Eng.& Arch. Vol. 5, No.2, (2014) pp. 16-23

 

30.  Hashem F. El-Labban, M. Abdelaziz, and Essam R.I. Mahmoud: “C Characterization of Aluminum Alloy - based Nanocomposites                            Produced by the Addition of Al-Ti5-B1 to the Matrix Melt”, The Egyptian Int. J. of Eng. Sci. and Technology, Vol. 17, No. 2, April 2014, pp. 1933-1940.

 

 

31.  Hashem F. El-Labban, M. Abdelaziz and Essam R. I. Mahmoud: “Coating of 6028 Aluminum Alloy Using Aluminum Piston Alloy and Al-Si Alloy- Based Nanocomposites Produced by the Addition of Al-Ti5-B1 to the Matrix Melt”,  Metallurgical and Materials Transactions B, Vol. 45, No. 5, (2014)  pp. 1608-1614.   DOI 10.1007/s11663-014-0081-4

 

 

32.  Essam R.I. Mahmoud and Hashem F. El-Labban: “Microstructure and Wear Behavior of TiC Coating Deposited on Spheroidized Graphite Cast Iron Using Laser Surfacing”,  Engineering, Technology & Applied Science Research Journal, Vol. 4, No. 5 (2014) pp. 696 – 701. https://doi.org/10.48084/etasr.483

 

 

33.  Hashem F. El-Labban and Essam R.I. Mahmoud: “Characterization of Commercially Pure Titanium Laser Cladded with TiC Particles”,  The IUP Journal of Mechanical Engineering, Vol. VII, No. 3 (2014) pp. 7 – 20. https://ssrn.com/abstract=2620543

 

34.  Hashem F. El-Labban and Essam R.I. Mahmoud: “On the Possibility of Laser Cladding for 304 Stainless Steel using CommerciallyPure Titanium”,  International Journal of Engineering Science and Technology (IJEST), Vol. 6, No. 6 (2014) pp. 401 – 407.

 

35.  Essam R.I. Mahmoud and Hashem F. El-Labban:  “Laser Cladding of Ti-6Al-4V Alloy Using TiC Particles”, International Journal of Applied Engineering Research,  Vol. 9, No. 20 (2014) pp. 6885 – 6894.

 

36.  Essam R.I. Mahmoud and Hashem F. El-Labban:  “Laser Surface Cladding of High C-Cr Bearing Tool Steel with TiC Powders”, The IUP Journal of Mechanical Engineering, Vol. VII, No. 4,  (2014) pp. 67 – 79. https://ssrn.com/abstract=2638209

 

37.  El-Labban, H.F., Mahmoud, E.R.I., Al-Wadai, H.: “Laser cladding of Ti‐6Al‐4V alloy with vanadium carbide particles”, Advances in Production Engineering & Management, Volume 9,  Number 4,  December (2014)  pp 159–167. http://dx.doi.org/10.14743/apem2014.4.184 

 

38.  Hashem F. El-Labban, M. Abdelaziz, and Essam R. I. Mahmoud: “Characterization of Aluminum Alloy-Based Nanocomposites Produced by the Addition of Al-Ti5-B1 to the Matrix Melt”,  American Journal of Nanotechnology, Vol. 4, No. 1 (2013) pp. 8 – 15.

a.       Doi:10.3844/ajntsp.2013.8.15

 

39.  Hashem F. El-Labban, M. Abdelaziz, and Essam R.I. Mahmoud: “Characterization of Aluminum Alloy - based Nanocomposites                            Produced by the Addition of Al-Ti5-B1 to the Matrix Melt”, American Journal of Nanotechnology 4 (1): 8-15, 2013 ISSN 1949-0216.

 

 

40.  Hashem F. El-Labban, M. Abdelaziz, and Essam R.I. Mahmoud: “Modification of Carbon Steel by Laser Surface Melting: Part I: Effect of Laser Beam Travelling Speed on Microstructural Features and Surface Hardness”, American Journal of Engineering and Applied Sciences 6 (4): (2013) 385-392,.

 

41.  Hashem F. El-Labban, M. Abdelaziz, and Essam R.I. Mahmoud: “Modification of Carbon Steel by Laser Surface Melting: Part I: Effect of Laser Beam Power on Microstructural Features and Surface Hardness”, American Journal of Engineering and Applied Sciences 6 (4): (2013), pp 352-360.

 

42.  Abdel-Monem El-Batahgy and Essam R. I. Mahmoud: “Corrosion Fatigue Failure of Boiler Tubes at a Fertilizer Plant”, Materials Performance Journal (NACE International), Vol. 52, 2013, pp. 48-51.

 

43.  E. R. I. Mahmoud, Morsy Amin: “Improvement of Galvanized Steel -Stainless Steel Spot welded joint Using Inserted Pin Technique”, New York Science Journal, 4, (2), (2011) pp. 27-34.

 

44.  E. R. I. Mahmoud, K. Ikeuchi, T. Shibayanagi and M. Takahashi: “Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing”, Wear Journal, 268, (9-10), (2010) pp. 1111- 1121. https://doi.org/10.1016/j.wear.2010.01.005

 

45.  E. R. I. Mahmoud, K. Ikeuchi, T. Shibayanagi and M. Takahashi: “Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface”, Science and Technology of Welding & Joining, 14, 5 (2009) pp. 713-725.  DOI 10.1179/136217109X406974

 

46.  E. R. I. Mahmoud, K. Ikeuchi, T. Shibayanagi and M. Takahashi: “Fabrication of Surface-Hybrid-MMCs Layer on Aluminum Plate by Friction Stir Processing and Its Wear Characteristics”, Materials Transactions, 50, 7 (2009) pp. 1824-1831. doi:10.2320/matertrans.M2009092

 

47.  E. R. I. Mahmoud, K. Ikeuchi and M. Takahashi: “Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing”, Science and Technology of Welding & Joining, 13, 7 (2008) pp. 607-618.  DOI 10.1179/136217108X333327