Latest scientific research
[1]. Zeeshan Khan, Akhtar Gul, Syed Azmat Ali Shah, Qazi Samiullah, Nauman Wahab, Eid Badshah, Tayyab Naqash, Khan Shahzada, (2021) ' Utilization of Marble Wastes in Clay Bricks: A Step towards Lightweight Energy Efficient Construction Material 'in Civil engineering JOURNAL – Tehran, 10.28991/cej-2021-03091738, Vol 7 No 9.
[2]. MT Tayyab Naqash, Antonio Formisano, Ehsan Noroozinejad Farsangi (2021), Overview on the strength and serviceability requirements of Glass panels in Structures (ELSEVIER), ISSN: 2352-0124 .
[3]. Sanoufi, A., Bawazeer, H., Sebaei, Y., Shaheen, Y., & MT Naqash (2021). Structural Assessment Considering Architectural Constraints with Seismic Retrofitting. Journal of Engineering Research and Reports, 20(10), 6-14. https://doi.org/10.9734/jerr/2021/v20i1017383.
[4]. Muhammad Tayyab Naqash, Mohammad Hasan Aburamadan, Ouahid Harireche, Abdulrahman AlKassem, Qazi Umar Farooq (2021) The Potential of Wind Energy and Design Implications on Wind Farms in Saudi Arabia. International Journal of Renewable Energy Development, 10(4), 839-856. https://doi.org/10.14710/ijred.2021.38238
[5]. Muhammad Ouzzane, Ouahid Harireche, MT Naqash (2021), Assessment of the Potential Use of Shallow Geothermal Energy Source for Air Heating and Cooling in the Kingdom of Saudi Arabia in Nature Environment and Pollution (In press, Special Issues Dec 2021)
[6]. MT Naqash, Qazi U Farooq, Ouahid Harireche, (2021), Assessment and feasibility of shallow geothermal for heating and cooling systems under local climatic and soil conditions, in International Journal of Energy, Environment and Economics, Volume 27 Issue 4.
[7]. Ouahid Harireche, MT Naqash, Qazi U Farooq (2021), "A full Numerical Model for the Installation Analysis of Suction Caissons in Sand", in Ocean Engineering. Vol 234, Issue August
[8]. MT Naqash.(2021) A Note on the Structural Assessment of Perforated Panels used in Façade, in Journal of Engineering Research and Reports, Vol 20, Issue 6. DOI: 10.9734/J.E.R.R./2021/v20i617335
[9]. MT Naqash.(2021) "Assessment of rigid steel frames: ductility versus damageability" in Journal of Applied Science and Engineering, vol 24, issue 6.
[10]. Syed Azmat Ali Shah, Waqas Ahmad, Khan Shahzada, MT Naqash, Amjad Ali, Shah Nawaz Khan, (2021) Assessment Of Safety Measures Against Seismic And Fire Hazards In The University of Buner in Disaster Advances in press, November 2021 issue
[11]. Shah Nawaz Khan, Amir Nawaz Khan, Muhammad Amjad Khan, Syed Azmat Ali Shah, MT Naqash (2021), Assessment of Drought, its causes and consequences in connection with local wisdom: A case study of Kohat basin drought-2017, Khyber Pakhtunkhwa, Pakistan ACCEPTED in Disaster Advances www.worldresearchersassociations.com.
[12]. Wajid Hussain, William G. Spady, Sohaib Zia Khan, Bilal A. Khawaja , MT Naqash, Lindsey Conner (2021), Impact Evaluations of Engineering Programs Using Abet Student Outcomes IEEE Access. ( Volume: 9) 10.1109/ACCESS.2021.3066921. Pages: 46166 - 46190
[13]. Qazi U. Farooq and MT Naqash, (2021) "Performance of shallow building foundations under infrequent rainfall patterns at Al-Madinah Saudi Arabia", in The Open Civil Engineering Journal. ISSN: 1874-1495.
[14]. Syed Azmat Ali Shah, Mian Asfahan Ali Gul, MT Naqash, Zeeshan Khan and Muhammad Rizwan. (2021) "Effects of Fibre Reinforcements on Strength of Shotcrete" in Civil Engineering and Architecture
[15]. MT Naqash and Qazi Umar Farooq (2020) "Effects of Soil Interaction on the Seismic Design of Long Span Rigid Steel Frames using Contemporary Building Codes" Published in Quaid e Awam University Research Journal of Engineering
[16]. Muhammad Umar, Syed Azmat Ali, Khan Shahzada, MT Naqash, Wajid Ali, (2020) "Seismic capacity assessment of reinforced concrete frames with perforated unreinforced brick masonry infill wall", in Civil Engineering Journal (Tehran) Doi: 10.28991/cej-2020-03091625,Vol 6, No 12 (2020)
[17]. MT Naqash, (2020), "Pushover Response of Multi Degree of Freedom Steel Frame", , in Civil Engineering Journal (Tehran) Vol 6 (2020): Special Issue "Emerging Materials in Civil Engineering", http://dx.doi.org/10.28991/cej-2020-SP(E.M.C.E.)-08
[18]. Wajid Hussain, William G. Spady, MT Naqash, Sohaib Zia Khan, Bilal A. Khawaja , Lindsey Conner (2020), "ABET accreditation during and after covid19 - navigating the digital age", In IEEE Access. Print ISSN: 2169-3536, Online ISSN: 2169-3536DOI: 10.1109/ACCESS.2020.3041736
[19]. Bilal Zaman Afridi, Khan Shahzada, MT Naqash (2019) "Mechanical Properties of Polypropylene Fibers Mixed Cement-Sand Mortar" doi:10.5937/jaes17-19092 in Journal of Applied Engineering Science
[20]. Ayed Eid Alluqmani , MT Naqash , Ouahid Harireche , (2019) "A standard formulation for the installation of suction caissons in sand", Journal of Ocean Engineering and Science (2019), doi: https://doi.org/10.1016/j.joes.2019.07.001.
[21]. MT Naqash, (2019) "Design and Fabrication of Aluminum Cladding and Curtain Wall of a Sports Club". Open Journal of Civil Engineering, Vol.09 No.01(2019), Article ID:90694,17 pages 10.4236/ojce.2019.91002.
[22]. MT Naqash, Q. U Farooq, O Harireche, (2019) "Seismic Evaluation of Steel Moment Resisting Frames (MRFs)—Supported by Loose Granular Soil", Open Journal of Earthquake Research, 2019, 8, 37-51 http://www.scirp.org/journal/ojer ISSN Online: 2169-9631 ISSN Print: 2169-9623.
[23]. Qazi U. Farooq and MT Naqash, (2018) "Comparison of Numerical Assessment and Periodic Progress of Specific Course Learning Outcomes for Introductory and Reinforce Level Engineering Courses", in Journal of Education Scientific & Academic Publishing, http://www.sapub.org, p-ISSN 2162-9463, e-ISSN 2162-8467, 2018: 8(3): 42-47, doi:10.5923/j.edu.20180803.02 .
[24]. MT Naqash, Ayed Alluqmani, (2018) "Codal Requirements Using Capacity Design Philosophy, and Their Applications in the Design of Steel Structures in Seismic Zones", Open Journal of Earthquake Research, 2018, 7, http://www.scirp.org/journal/ojer, ISSN Online: 2169-9631, ISSN Print: 2169-9623.
[25]. MT Naqash. and Umar, F.Q. (2018) "Performance of Rigid Steel Frames under Adequate Soil Conditions Using Seismic Code Provisions". Open Journal of Civil Engineering, 8, 1-12. https://doi.org/10.4236/ojce.2018.82008.
[26]. Ayed Eid Alluqmani & MT Naqash.; (2018), "A Parametric Study for the Design of Truss Building Subjected To Wind Actions" in Saudi j. civ. eng.; Vol-2, Iss-2 (Sep-Oct, 2018):62-75,
[27]. Bhatti AQ and MT Naqash, (2017) "Performance Base Design of Multi-Storey Steel Structures Considering Dynamic Loads Originated by Geological Agents", In Journal of Steel Structures & Construction, 2017, 3:2, DOI: 10.4172/2472-0437.1000134.
[28]. Salim Khoso, MT Naqash, Sadaf Sher, Zeeshan Saeed, (2018) "An Experimental Study on Fiberly Reinforced Concrete using Polypropylene Fibre With Virgin and Recycled Road Aggregate" In Architecture Civil Engineering Environment, Scientific Journal Of Silesian University Of Technology-Series Transport, No. 1/2018, Page: 73-80.
[29]. Asfandyar Ahmed ,Imad Ahmad, Khan Shahzada, MT Naqash ,Bashir Alam, Muhammad Fahad and Sajjad Wali Khan, (2018) "Seismic Capacity Assessment of Confined Brick Masonry, Building: An Experimental Approach", in Hindawi Shock and Vibration, Volume 2018, Article ID 4756352, 10 pages, https://doi.org/10.1155/2018/4756352.
[30]. MT Naqash, Ayed Alluqmani, (2018), "Inelastic Behavior of Steel Buildings in Seismic Zones", Advances in Applied Sciences, 2018; 3(1): 1-8, http://www.sciencepublishinggroup.com/j/aas, doi: 10.11648/j.aas.20180301.11, ISSN: 2575-2065 (Print); ISSN: 2575-1514 (Online).
[31]. MT Naqash, (2017), "Codal Comparisons for the Seismic Resistance of Steel Moment Resisting Frames (MRF). Part A: Codes Approach" International Journal of Construction Engineering and Management 2017, 6(6): 254-263 DOI: 10.5923/j.ijcem.20170606.04.
[32]. MT Naqash, "Codal Comparisons for the Seismic Resistance of Steel Moment Resisting Frames (MRF). Part B: Design Approach" International Journal of Construction Engineering and Management 2017, 6(6): 264-272 DOI: 10.5923/j.ijcem.20170606.05.
[33]. MT Naqash, Ayed Alluqmani, (2017), "Curved Curtain Wall for the Extension of Aspire Academy Qatar", in MedCrave Online Journal of Civil Engineering (M.O.J.C.E.), DOI:10.15406/moje.2017.02.00051.
[34]. MT Naqash, Antonio Formisano, and Gianfranco De Matteis, (2016), "Aluminium Framing Members in Facades", Key Engineering Materials, doi:10.4028/www.scientific.net/KEM.710.327 Trans Tech Publications, Switzerland.
[35]. MT Naqash, Antonio Formisano, and Gianfranco De Matteis, (2016), "Design and Performance Testing of a Skylight in Qatar", Key Engineering Materials, doi:10.4028/www.scientific.net/KEM.710.267, Trans Tech Publications, Switzerland.
[36]. MT Naqash, (2016), "On the deflection of window glass subjected to lateral forces", In the International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347,Volume 05, Number 01. B.R.C.O.R.P. publishers.
[37]. MT Naqash, (2015), "Structural Design Structural design of pergola with Airfoil louvers", In the International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347,Volume 04, Number 03, July 2015,. B.R.C.O.R.P. publishers.
[38]. MT Naqash, (2015), "Structural Design Proposal for the Le Boulevard Skylight Doha Qatar", In the International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347, Volume 04, Number 02, April 2015,. B.R.C.O.R.P. publishers.
[39]. MT Naqash, (2015), "A Case Study on the Structural Design of Honey Comb Core Metal Panel", In the International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347, Volume 04, Number 01, January 2015, . B.R.C.O.R.P. publishers.
[40]. Riaz Uddin , Wen Long Yue , MT Naqash, (2014), "Option for Reducing Car Dependency in Adelaide", In International Journal of Applied Sciences, Engineering and Technology Vol. 03, No. 01, pp 32-39, Jan-Dec 2014. B.R.C.O.R.P. publishers.
[41]. MT Naqash, (2014), "A Study on the Damageability Issue in the Design of Steel Moment Resisting Frames", in Sciknow Publications Ltd. American Journal of Civil and Structural Engineering, DOI: 10.12966/ajcse.10.02.2014, AJCSE 2014, 1(4):96-103
[42]. MT Naqash Khalid Mahmood, Salim Khoso, (2014), "An overview on the Seismic design of braced frames", In American Journal of Civil Engineering. . Vol. 2, No. 2, 2014, pp. 41-47. doi: 10.11648/j.ajce.20140202.15
[43]. MT Naqash, G. Brando, G. De Matteis, (2014), "Calibration and Validation of Numerical Models through Experimental Tests", International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347, Vol. 03, No. 02, April 2014, pp 80-90.
[44]. MT Naqash, (2014), "Study on the fundamental period of vibration of steel moment resisting frames", International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347, Vol. 03, No. 01, January 2014, pp. 1-6.
[45]. MT Naqash, October (2014), "Seismic Design of Steel Moment Resisting Frames", In N.E.D. University Journal of Research - Structural Mechanics, Vol XI, No. 1, 2014. Pp 29-38.
[46]. MT Naqash, (2013), "Effect of Interstory Drift Limits on High Ductility in Seismic Design of Steel Moment Resisting Frames", in Pakistan Journal of Engineering and Applied Sciences, Pak. J. Engg. & Appl. Sci. Vol. 16, Jan., 2015 (p. 133–142).
[47]. G. De Matteis, MT Naqash, G. Brando, (2012), "Effective Length of Aluminium T-stub Connections by Parametric Analysis". Engineering Structures, 2012. 41: p. 548-561.
[48]. MT Naqash, G. De Matteis, and A. De Luca, (2012), "Seismic design of Steel Moment Resisting frames-European versus American Practice". In N.E.D. University Journal of Research, Thematic Issue on Earthquake, 2012.
CONFERENCES [1]. MT Naqash , Ouahid Harireche, Qazi Umar Farooq (2021), “Assessment of Ground to Air heat transfer System for local soil conditions” Paper ID (601), in 3rd Conference on Sustainability in Civil Engineering (CSCE’21) Islamabad. (Conf Paper) [2]. QU Farooq, MT Naqash,(2020) “Consequences of poorly compacted backfill material on concrete retaining walls”, 2nd Conference on Sustainability in Civil Engineering (CSCE'20) 2 (2020), 604 (CONFERENCE PAPER) [3]. G. De Matteis, MT Naqash G. Brando, (2011), “Parametric Analysis of Welded Aluminium T-Stub Connections”, in B.H.V. Topping, Y. Tsompanakis, (Editors), "Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing", Civil-Comp Press, Stirlingshire, UK, Paper 162, 2011. doi:10.4203/ccp.96.162. (CONFERENCE PAPER) [4]. G. De Matteis, MT Naqash, and G. Brando, (2011), “Aluminium T-stub connections: additional parametric analysis for the evaluation of effective width”, in XXIII Italian steel conference. 2011. Lacco Ameno, Ischia, Naples. (CONFERENCE PAPER) [5]. MT Naqash, G. De Matteis, A. De Luca, (2011), “European versus American practice for seismic design of steel moment resisting frames (MRFS)”, in XXIII Italian steel conference. 2011. Lacco Ameno, Ischia, Naples. (CONFERENCE PAPER) [6]. MT Naqash, G. De Matteis, and A. De Luca, (2012), “Effect of Capacity design rules on the performance of Moment resisting frame”, in 15th World Conference on Earthquake Engineering, September 2012, Lisbon, Portugal. (CONFERENCE PAPER)
BOOKS [1]. MT Naqash, (2018) “Design of Industrial Truss Building Using Eurocodes”, ISBN-13: 978-3-330-32893-8, ISBN-10: 3330328932, EAN: 9783330328938, Number of pages: 200, Published on: 2018-04-25, Publishing house: LAP LAMBERT Academic Publishing. (BOOK)
REPORTS [2]. MT Naqash, (2012), Second year annual defence report on a):”T-stub connections, Parametric analysis for the evaluation of effective width” b): “Seismic design of steel Moment resisting frames (MRFs): European Versus American Practices”. (REPORT) [3]. MT Naqash (2012), Research project in RELUIS 2010-13, Technical report, “Optimum design of Moment Resisting Steel Frames according to Eurocode 8”, Under (Riferimento codice selezione 84/2012- Dipartimento Ingegneria e Geotecnologie). (REPORT) [4]. MT Naqash, (2011), First year annual defence report on a): “The influence of joints on metal structures” b): “Investigation and comparison of the Design methodologies for steel lateral load resisting structures following AISC and Eurocode approach” c): “Interpretation of Aluminium Beam to Column Joint behaviour considering EC3 provisions”. (REPORT) [5]. MT Naqash, (2010), Report on “Influence of Connections on metal Moment Resisting Frames resisting frames following Eurocodes and American codes provisions”, Assegni Regionali Per Attivita Di Ricerca E Tecnico-Scientifiche (Re.C.O.Te.S.S.C.). Research activity financed by Re.C.O.Te.S.S.C. (REPORT) |
Field Experience |
· Worked as Principal Structural Engineer at ALUTEC (HBK Holding), Doha, Qatar · Served as Head of Department at Civil Engineering Department, Iqra National University, Peshawar, Pakistan · Served as Management Executive at Pakistan Poverty Alleviation Fund Islamabad · Served in MobiServe Pakistan Pvt Limited Islamabad as Production engineer · Worked as an apprentice Engineer in Star Construction Company in Peshawar and Islamabad · Worked with DHV Consultants at Mardan Office for the Designing of projects for ALL FARMS NWFP water management Projects · Worked on site as an apprentice engineer and soil testing with CD and MD Peshawar on flyover project at Suri Pull Peshawar · Soil index property testing for irrigation projects for various Districts in Sindh by various Consultants at QUEST laboratory |
DESIGN PROJECTS |
· Façade structural Design of HMC Simulation centre Doha Qatar · Façade structural Design of Al Ahli Sports Club Doha Qatar · Com 11 building, blade wall, stick curtain wall and unitized curtain wall system Lusail Qatar · Skylight, Curtain wall and Windows for Le boulevard building for commercial bank Qatar · Windows and Skylights for Ministry of interiors building A and building B, Qatar · Skylight, Curtain wall and Windows for Health care centres Qatar · GHD building Qatar, balustrade design · Pre-fabricated light gauge steel structures for labour accommodations in Qatar · Industrial Building designed in steel having 80m x30m using Eurocodes with 20 ton crane/ Fujairah Free zone. · Fujairah Grand Mosque/ Fujairah/ 22 different dimensions steel arches. · Novotel Hotel Fujairah/ Fujairah/different types of steel stair cases and hand rails. · Show room of 100mx30m dimension with mezzanine in Fujairah city. · 12m height steel chimney in Fujairah Rockwool factory. · 50 m length inclined conveyor with support structure. · 200m x40 m double slope steel structure shade with different capacity of cranes in Fujairah Rockwool factory / Fujairah. · 30x30m single slope steel structure control building for Alstomin Fujairah. · Design and analysis of six storeys buildings in steel with AISC/ASCE (seismic provisions) code and Eurocode 3/Eurocode 8 (In Master “Design of Steel Structures”) · Non Linear analysis of beam to column aluminium and steel connections with Abaqus for recalibrating Eurocode 9 formulation for T-stubs using Abaqus FEM code · Seismic design and analysis of overhead water Tank in steel, in Master “Design of Steel Structures” · Case Study on New York times building, design and analysis for wind actions in Master “Design of Steel Structures” |
DISTINCTIONS |
· Best reseacrh award in 2018 from Faculty of Engineering, Islamic University Madinah · FIRST POSITION in M.S. Design of Steel Structures in 2008/09 II Edition at University of Naples Federico II, Italy · GOLD MEDAL - Faculty top of university in 03 BATCH QUEST Nawabshah Sindh, Pakistan. · GOLD MEDAL-Best Graduate of the university at QUEST Nawabshah Sindh, Pakistan. (Throughout position holder of the class) · SILVER MEDAL-Position holder of 03 Batch Civil Engineering at QUEST Nawabshah Sindh, Pakistan. · SILVER MEDAL-Second position in pre engineering B.I.S.E Mardan, KPK, Pakistan |