Dr. Engr. Ayed Eid Alluqmani:
1.
Dr. Alluqmani is an Engineer, Designer, Lecturer,
Assistant Professor and Researcher specializing in Civil
and Structural Engineering.
2.
Alluqmani has several publications and scientific
papers, and holds some awards.
3.
Alluqmani worked as an engineer for the design, implementation
(execution), maintenance, supervision of design and
supervision of implementation in all fields related to Civil
Engineering.
4.
Alluqmani is also a faculty member in the field of Civil
and Structural Engineering at Umm Al-Qura University (UQU) in Makkah
(formerly) - at the Islamic University in Madinah, IUM (currently).
5.
Alluqmani holds a Bachelor's Degree in Civil
Engineering (Umm Al-Qura University, KSA, 2005), a Master's
Degree in Structural and Foundation Engineering (Heriot-Watt
University, UK, 2010), and a PhD Degree in Civil
Engineering (Strathclyde University, UK, 2014) - Top 500 Universities in the World.
6. Teaching Experience for Academic Rank of Assistant
Professor (Member of Teaching Staff) - Almost Five (5) Years in Civil
and Structural Engineering – More than 15 Courses have been
taught.
7.
Researches and
Publications for
Academic Rank of Assistant Professor - Many Articles
are published or under publication in Journals and Conferences and some
Articles are under Constructions with continuity of Publishing.
8. Distinguish International Journals: There
is a Journal Paper, which was published in "The Journal
of Engineering, Design and Technology".
9. Books: Two Books are under Construction. BOOKS' TITLES:
1) Design and
Behavior of Reinforced Concrete Beams, and 2) Concrete Technology and
Design of its Mixtures.
10. Academic Supervision for Master and PhD: Not yet as I have awarded my PhD
since Three Years and I worked in Umm Al-Qura and Islamic
Universities where No Master and PhD Programs there.
11. Post-Doc Positions: I got invitations from: 1) Strathclyde
University, United Kingdom, 2) the Australian
College of Kuwait (ACK), and 3)
the Bahcesehir University (BAU), Istanbul, Turkey.
These were to Teach
undergraduate Students and to Supervise Master and PhD Students
with doing some Researches but I transferred to and commenced
with the Islamic University in Madinah (IUM).
12. I have Skills of Writing Research Proposals and FOUR
Projects were submitted for funding.
13. Experience with ABET and Evaltools through Three
Years in Umm Al-Qura and Islamic Universities.
14.
Supervisor of Civil Engineering Department, Faculty of
Engineering, Islamic University in Madinah, till 1 Dhul-Hijjah
1436 AH.
15.
Coordinator of Research and Practical Projects in the
Department of Civil Engineering, Faculty of Engineering, Islamic University in
Madinah.
16.
Field Supervisor of the Summer Training for students who were
trainees in the Faculty of Engineering at the Islamic University in the public
(governmental) and private sectors.
17.
Chairman of the Students' Extra Curricular Affairs Committee
of the Faculty of Engineering, Islamic University in Madinah.
18.
Member of several Committees, Faculty of Engineering, Umm Al-Qura and Islamic Universities.
19.
Member of the Saudi Council for Engineers (SCE) - "Professional
Engineer".
20.
Member of the Saudi Society of Civil Engineering (SSCE).
21.
Member of several Committees, Councils, Societies,
Associations and local and international Journals; and a
member of: ACI (01227956); ASCE
- SEI (9923373); IStructE (088387123); IET
(1100352217); ICE; SCE (8797) and SSCE (30-3-0538)
22. Team Work Spirit: I worked with many Colleagues, Engineers,
Professors, Specialists and others in a lot of Departments,
Sectors, Committees, Researches and etc.
Ex Employers:
1.
Islamic University in Madinah (IUM) - Faculty of Engineering - Department of
Civil Engineering (CE).
Title: Associate Professor of Civil &
Structural Engineering.
Duration: from 17/9/1441 A.H. up to Date.
2.
Islamic University in Madinah (IUM) - Faculty of Engineering - Department of
Civil Engineering (CE).
Title: Assistant Professor of Civil &
Structural Engineering.
Duration: from 2/11/1436 A.H. to 17/9/1441 A.H..
3.
Umm Al-Qura University (UQU) - College of Engineering & Islamic
Architecture - Department of Civil Engineering (CE).
Title: Assistant Professor of Civil & Structural
Engineering.
Duration: from 29/12/1435 A.H. to 2/11/1436 A.H.
4.
Strathclyde University, Department of Civil Engineering, Glasgow-UK
Title: a Researcher in Civil and Structural
Engineering
Duration: from February 2012 to June/July 2014.
5.
Heriot-Watt University, Department of Civil Engineering, Edinburgh-UK
Title: a Researcher in Civil and Structural
Engineering
Duration: from September 2010 to February 2012.
6.
Umm Al-Qura University (UQU) - College of Engineering & Islamic
Architecture - Department of Civil Engineering (CE).
Title: Teaching-Assistant (Instructor -
Lecturer) of Civil & Structural Engineering.
Duration: from 29/12/1428A.H. to 29/12/1435 A.H.
7.
Taibah University- Department of Projects Administration
Title: Civil Engineer- Projects Engineer
Duration: from 11/11/1426 A.H. (13/12/2005) until:
28/12/1428A.H. (7/01/2008).
Assignments: many projects under designing and
construction.
8.
Shibh Al Jazeera Contracting Co.
Title: Civil Engineer – Structures & Bridges
Duration: from 26/6/1426 A.H. to 10/11/1426 A.H.
Assignments: the project of crossing the Middle
Circle Road with the King Fahd Road and the road of Sayed Al Shohada.
NOTE:
I had and still have some cooperative works with Private Engineering Companies
and Offices and With General and Public Sections, Councils, Committees and
Boards.
Selected Technical and Published Works, and Papers (with
IUM):
Paper A1:
Ayed Eid Alluqmani, Muhammad Tayyab Naqash, Ouahid Harireche. (2019)
A Standard Formulation for the
Installation of Suction Caissons in Sand. Journal of Ocean Engineering and
Science, 2019, doi: https://doi.org/10.1016/j.joes.2019.07.001
Paper A2: Hamdy El-Gohary
& Ayed Eid Alluqmani. (2019) Investigation of the Dynamic
Behavior of Coupled Shear Wall Systems. (JESC) The Journal of Engineering,
Science and Computing. Islamic University of Madinah. Issue I, Volume I, April,
2019.
Paper A3:
Ayed Eid Alluqmani & Muhammad Tayyab Naqash. (2018) A Parametric
Study for the Design of Truss Building Subjected To Wind Actions. Saudi Journal
of Civil Engineering; Publication by ‘‘Scholars Middle East Publishers’’,
Dubai, United Arab Emirates. Vol-2, Iss-2 (Sep-Oct, 2018):62-75.
Paper A4:
Naqash, M.T.
and Alluqmani, A. (2018) Codal Requirements Using Capacity Design
Philosophy, and Their Applications in the Design of Steel Structures in Seismic
Zones. Open Journal of Earthquake Research, 7, 88-107. Scientific
Research Publishing.
Paper A5:
Muhammad Tayyab Naqash, Ayed Alluqmani. (2018) Inelastic
Behavior of Steel Buildings in Seismic Zones. Journal of Advances in Applied
Sciences. Vol. 3, No. 1, 2018, 1-8. Science Publishing Group, ISSN: 2575-2065 (print); ISSN: 2575-1514
(online).
Paper A7: A. T. Ahmed, A.
E. Alluqmani, Md. Shafiquzzaman. (2018) Impacts of Landfill Leachate on
Groundwater Quality in Desert Climate Regions. International Journal of
Environmental Science and Technology. Springer. Islamic Azad University (IAU).
15 November 2018.
Paper A8:
Muhammad
Tayyab Naqash, Ayed Eid Alluqmani. (2017) Curved Curtain Wall for the
Extension of Aspire Academy Qatar. MOJ Civil Eng, MedCrave Online Journal of Civil Engineering (MOJCE). Vol. 2,
Issue 6. 25th May 2017.
Paper A9:
Ayed Eid Alluqmani, Qazi Umar Farooq, Ouahid Harireche. (2020) A Semi-Analytical Framework for
One-Dimensional Hydro-Collapse Analysis of Partly Saturated Soils. Journal
of Innovative Infrastructure Solutions, 2020, 5:5.
Paper A10:
Abdul Qadir Bhatti, Ayed Eid Alluqmani. (2020) Performance Based Seismic Design of High
Rise RC Frame Buildings. Interciencia
Journal, 2020.
Paper B1 (Replaced by Paper A6): Ayed E. ALLUQMANI,
Abdelkader T. AHMED. (2018) Landfill Site Impacts on the Aquifer Quality in
Madinah, Saudi Arabia. Researchfora International Conference, Medina,
Saudi Arabia, 25th-26th Nov. 2017.
Paper B2:
Abdelkader T. Ahmed, Ayed E. Alluqmani. (2017) Management Options and
Life Cycle Assessment of Municipal Solid Waste in Madinah, KSA. The 19th
International Conference on Wastewater Treatment and Water Quality,Dubai, 08-09
April 2017, 19 (4) Part III.
===========================================================================
Alluqmani, A. E.
(2014) ''Design and Behaviour of RC Beams to ACI318-and-SBC304; and EC2 Codes
When Subjected To Asymmetric Loading''. Journal of Engineering, Design and
Technology (JEDT), Vol. 12, Issue 2, 2014.
Alluqmani, A. E.; and Saafi, M. B. (2014) ''New
Detailing-Approach and Design-Model for Wide RC Beams''. The 16th
Young Structural Researchers' Conference 2014 (YRC), the Institution of
Structural Engineers, London, England-UK. 2014. This Paper got a travel
grant.
Alluqmani, A. E.;
and Saafi, M. B. (2014) ''Structural Reinforced Concrete Beams in Shear''. The
2014 SSC-07 Conference, University of Edinburgh, Edinburgh, Scotland-UK. ISBN
9780956904522, Session 11: Engineering, Paper No. ENG 506. 6 pp.
Alluqmani,
A. E.; and Saafi, M. B. (2014) ''The Effect of Bearing Plate Widths on Wide
Concrete Member Capacities''. The 2014 SSC-07 Conference, University of
Edinburgh, Edinburgh, Scotland-UK. ISBN 9780956904522, Session 12: Engineering,
Paper No. ENG 507. 2014. 6pp. This Paper got a Prize of
1000 Sterling Pound and a travel grant.
Selected Technical and Published Works, Papers and Posters
(Prior to IUM):
1. Selected Published Papers:
1. Alluqmani, A.
E. 2014. ''Design and Behaviour of RC Beams to ACI318-and-SBC304; and EC2
Codes When Subjected To Asymmetric Loading''. Journal of Engineering, Design
and Technology (JEDT), Vol. 12, Issue 2, July 2014.
2. Alluqmani, A.
E.; and Saafi, M. B. 2014. ''New Detailing-Approach and Design-Model for
Wide RC Beams''. The 16th Young Structural Researchers' Conference
2014 (YRC), the Institution of Structural Engineers, London, England-UK. 5
March 2014. This Paper got a travel grant. 2014.
3. Alluqmani, A.
E.; and Saafi, M. B. 2014. ''Structural Reinforced Concrete Beams in
Shear''. The 2014 SSC-07 Conference, University of Edinburgh, Edinburgh,
Scotland-UK. ISBN 9780956904522, Session 11: Engineering, Paper No. ENG 506.
1-2 February 2014.
6 pp.
4. Alluqmani, A.
E.; and Saafi, M. B. 2014. ''The Effect of Bearing Plate Widths on Wide
Concrete Member Capacities''. The 2014 SSC-07 Conference, University of
Edinburgh, Edinburgh, Scotland-UK. ISBN 9780956904522, Session 12: Engineering,
Paper No. ENG 507. 1-2 February 2014. 6 pp. This Paper got a Prize of 1000
Sterling Pound and a travel grant. 2014.
5. Alluqmani, A.
E. 2013. ''Flexural and Shear Behaviour of Wide RC Beams''. The Civil
Engineering PhD Conference, University of Strathclyde, Glasgow, Scotland-UK. 30
October 2013.
6. Alluqmani, A.
E. 2013. ''Development of Detailing and Design Models for Wide Concrete
Beams''. The Engineering RPD Conference, University of Strathclyde, Glasgow,
Scotland-UK. 27 June 2013. 13 pp, with ''Proposed Detailing and Design
Models for Wide RC Members'' and ''The Structural Design and Behaviour of Wide
RC Beams''.
7. Alluqmani, A. E.;
and Haldane, D. 2011. ''Design of Reinforced Concrete Beams to
ACI318-and-SBC304; and EC2 Codes''. COBRA-2011 (RICS) Conference, University of
Salford, Manchester, England-UK, ISBN 978-1-907842-19-1, Section Six, Session
1: Building Technology, Paper No.2150. 12-13 September 2011. pp 459-468.
8. Alluqmani, A.
E.; and Haldane, D. 2011. ''Structural Design of Reinforced Concrete Beams:
Comparison In Accordance With ACI318-and-SBC304; and EC2 Codes''. The 5th
SSIC-2011 Conference, University of Warwick, Coventry, England-UK. ISBN
978-0-9569045-0-8, Section 5, Session 21: Construction and Architecture, Paper
No.21. 23-26 June 2011. 8pp. This Paper was awarded the second best paper in
Engineering, and got an iPad and a Prize of 945 Sterling Pound.
9. Alluqmani, A.
E.; and Haldane, D. 2011. ''Structural Behaviour of Reinforced Concrete
Beams: Comparison In Accordance With ACI318-and-SBC304; and EC2 Codes''. The 5th
SSIC-2011 Conference, University of Warwick, Coventry, England-UK. ISBN
978-0-9569045-0-8, Section 5, Session 21: Construction and Architecture, Paper
No.22. 23-26 June 2011. 9pp.
10. Alluqmani, A.
E. 2010. ''Reinforced Concrete Beams Design: Comparison In Accordance With
Saudi Building Code (SBC304) and Eurocode (EC2) Subjected To Asymmetric
Loading''. MSc Dissertation, Heriot-Watt University. UK. 23 August 2010.
111pp.
11. Alluqmani, A.
E. 2014. ''Development of Prediction and Design Models for Wide Concrete
Beams with Various Load and Support Widths''. PhD Thesis, University of Strathclyde. UK. 31
March 2014. 420pp.
2. Selected Oral
Presentations:
Presentation
1: Alluqmani, A. E.; ''Structural Reinforced Concrete Beams in Shear''. The
2014 SSC-07 Conference, University of Edinburgh, Edinburgh, Scotland-UK. 1-2
February 2014.
Presentation
2: Alluqmani, A. E.; ''The Effect of Bearing Plate Widths on Wide Concrete
Member Capacities''. The 2014 SSC-07 Conference, University of Edinburgh,
Edinburgh, Scotland-UK. 1-2 February 2014.
Presentation
3: Alluqmani, A. E.; ''Flexural and Shear Behaviour of Wide RC Beams''. The
Civil Engineering PhD Conference, University of Strathclyde, Glasgow,
Scotland-UK. 30 October 2013.
Presentation
4: Alluqmani, A. E.; ''Development of Detailing and Design Models for Wide
Concrete Beams''. The Engineering RPD Conference, University of Strathclyde,
Glasgow, Scotland-UK. 27 June 2013.
Presentation
5: Alluqmani, A. E.; ''Design of Reinforced Concrete Beams to
ACI318-and-SBC304; and EC2 Codes''. COBRA-2011 (RICS) Conference, University of
Salford, Manchester, England-UK. 12-13 September 2011.
Presentation
6: Alluqmani, A. E.; ''Structural Design of Reinforced Concrete Beams:
Comparison In Accordance With ACI318-and-SBC304; and EC2 Codes''. The 5th
SSIC-2011 Conference, University of Warwick, Coventry, England-UK. 23-26 June
2011.
Presentation
7: Alluqmani, A. E.; ''Structural Behaviour of Reinforced Concrete Beams:
Comparison In Accordance With ACI318-and-SBC304; and EC2 Codes''. The 5th
SSIC-2011 Conference, University of Warwick, Coventry, England-UK. 23-26 June
2011.
3. Selected Posters:
1.
Alluqmani, A. E. 2014. ''A New Prediction-Model for Wide Concrete Members''.
The University Research Day (URD) Conference, University of Strathclyde,
Glasgow-UK, 19 June 2014.
2.
Alluqmani, A. E. 204. ''The Structural Design and Behaviour of Wide RC Beams''.
The Engineering RPD Conference, University of Strathclyde, Glasgow,
Scotland-UK. June 2013.
3.
Alluqmani, A. E. 2011. ''Structural Design and Behaviour of R.C. Beams
Accordance With the Combined of American and Saudi Building Codes
(ACI318-and-SBC304) and EuroCode (EC2)''. The Joint Research Institute of Civil
& Environmental Engineering Review Visit Conference (JRI-CEE REVIEW VISIT),
Heriot-Watt University, Edinburgh-UK, 27-29 June 2011.
4. Selected Technical Reports:
The following technical reports have undertaken for
reviews, debates, corrections and revisions:
1.
Alluqmani, A. E. “New Models for Design and Prediction the Wide Concrete Beams
with Various Loads and Supports”. Research Report, University of Strathclyde, Glasgow-UK,
Nov. 2013, 214 pp.
2.
Alluqmani, A. E. “Structural Design and Behaviour of Wide RC Beams”. Research
Report, University of Strathclyde, Glasgow-UK, March 2013, 77 pp.
3.
Alluqmani, A. E. “Structural Design and Behaviour of Wide Structural Concrete
Members”. Research Report, University of Strathclyde, Glasgow-UK, June 2012,
109 pp.
4.
Alluqmani, A. E. “Structural Wide Reinforced Concrete Members”. Research
Report, Heriot-Watt University, UK, December 2011, 75 pp.