Personal website

400117

Latest scientific research

  1. Syed Tawab Shah , Zaira Zaman Chowdhury, Mohd. Rafie Bin Johan, Irfan Anjum Badruddin, H. M. T. Khaleed, Sarfaraz Kamangar, and Hussein Alrobei, Surface Functionalization of Magnetite Nanoparticles with Multipotent Antioxidant as Potential Magnetic Nanoantioxidants and Antimicrobial Agents, Molecules, 2022, 27(3), 789.

 

  1. H.M.T. Khaleed, Irfan Anjum Badruddin, Yaser H. Alahmadi, Amin A.G. Haider, Vineet Tirth , Ali A. Rajhi, Ali Algahtani, Ali E. Anqi, Sagr Alamri, Sarfaraz Kamangar, T.M. Yunus Khan, and Abou Bakr ElshalakanComparison of 3D Printed Underwater Propeller Using Polymers and Conventionally Developed AA6061, journal of Materials Engineering and Performance, https://doi.org/10.1007/s11665-022-06576-z.

 

 

  1. Belay Brehane Tesfamariam, Redeat Seyoum,, Dinsef Mensur Andoshe, , Tatek Temesgen Terfasa,Gulam Mohammed Sayeed Ahmed, Irfan Anjum Badruddin and H.M.T. Khaleed, Investigation of Self-Healing Mortars with and without Bagasse Ash at Pre-and Post-Crack Times, Materials 2022, 15, 1650. https://doi.org/10.3390/ ma15051650  

 

 

 

  1. Irfan Anjum Badruddin ,Sarfaraz Kamangar ,H.M.T. Khaleed ,C. Ahamed Saleel , Teuku Meurah Indra Mahlia ,”Heat transfer and entropy in a vertical porous plate subjected to suction velocity and mhd” Entropy 2021, 23(8), 1069; https://doi.org/10.3390/e23081069..25

 

  1. H.M.T. Khaleed, Irfan Anjum Badruddin, A.N. Saquib , Ali E. Anqib, Vineet Tirth, M.F. Addas , Faisal O. Mahroogi , Sarfaraz Kamangar , T.M. Yunus Khan , Amro Hamada M , Amin A.G. Haider, Finite element analysis of nylon based 3D printed autonomous underwater vehicle propeller, Materials Research. 2020; 23(5): e20200236, DOI: https://doi.org/10.1590/1980-5373-MR-2020-0236.

 

  1. H. M. T. Khaleed , Irfan Anjum Badruddin ,  A. N. Saquib , M. F. Addas , Sarfaraz Kamangar and T. M. Yunus Khan 2019, Novel Approach to Manufacture an AUV Propeller by Additive Manufacturing and Error Analysis,         Applied Sciences (Switzerland), Vol 9, Page 4413; doi:10.3390/app9204413.

 

  1. A. N .Saquib, H.M.T.Khaleed, Irfan Anjum Badruddin, Ali Algahtani, M.F.Addas , A.B.Abdullah, Abdulgaphur A, Sarfaraz Kamangar , T. M. Yunus Khan, 2019, Development of Preform for Simulation of Cold Forging Process of A V8 Engine Camshaft Free from Flash & Under-filling, Mathematics, Vol 7, Page 1026; doi:10.3390/math7111026

 

 

  1. V.Komalapur , H.M.T.Khaleed , H.Udayaprasanna & Abdulgafur a, optimization of AA7075 autonomous underwater vehicle (auv) propeller front hub pre-form sizing for flash-less cold forging process – a FE study, International Journal of Latest Trends in Engineering and Technology Vol.(9)Issue(3),2018 pp.140-147 DOI: http://dx.doi.org/10.21172/1.93.24 e-ISSN:2278-621X.

 

  1. Abdullah A.A.A. Al-Rashed, Salman Ahmed N.J, Sarfaraz Kamangar, H.M.T. Khaleed, T.M.Yunus Khan, Abdulwahab A. Alnaqi, Double Diffusive Flow in a Porous Medium Embedded with Vertical Annulus with Power Law Heating, SSRG International Journal of Mechanical Engineering (SSRG-IJME VOL-3 ISSUE-9 2016.

 

  1. Khaleed H.M.T., Quadir G.A., Addas M.F. ,Al-Rashed A.A.A.A. , Ahmed N.J.S , Badruddin I.A. Khan T.M.Y. , Kamangar S., Thermal Analysis of Cup-Shaped Object and Experiment for Flash-Less Cold Forging Using FEM, Applied Mechanics and Materials Vol. 786 (2015) pp 243-247, © (2015) Trans Tech Publications, Switzerland.

 

  1. Irfan Anjum Badruddin ,  Salman Ahmed N. J., , Abdullah A. A. A. Al-Rashed, N. Nik-Ghazali, Mohammed Jameel , Sarfaraz Kamangar, H. M. T. Khaleed, T. M. Yunus Khan, “ Conjugate Heat Transfer in an Annulus with Porous Medium Fixed Between Solids” Transport in Porous Media, September 2015, Volume 109, Issue 3, pp 589-608.

 

  1. T.M. Yunus khan, Irfan Anjum Badruddin, Ahmad Badarudin, N.R. Banapurmath, N.J. Salman Ahmed, G.A. Quadir, Abdullah A.A.A. Al-Rashed, H.M.T. Khaleed, Sarfaraz Kamangar Effects of engine variables and heat transfer on the performance of biodiesel fueled IC engines, Renewable and Sustainable Energy Reviews, Volume 44, April 2015, Pages 682-691 (ISI/SCOPUS Cited Publication). 

 

  1.  Quadir G.A., Ahmed N.J.S., Al-rashed AAAA ,Badruddin I.A, Khaleed H.M.T.,Kamangar s. Finite Element Analysis of Heater Length in a Porous Annulus - Part A, Applied Mechanics and Materials Vol. 786 (2015) pp 193-198, (2015) Trans Tech Publications, Switzerland.

 

  1. Al-Rashed A.A.A.A., Ahmed S.N.J., Quadir G.A.,Khaleed H.M.T., Badruddin I.A., Khan Y.T., Kamangar S., Finite Element Analysis of heater length in a porous, annulus - part B, Applied Mechanics and Materials Vol. 786 (2015) pp 199-204, © (2015) Trans Tech Publications, Switzerland

 

 

  1. Irfan Anjum Badruddin, Sarfaraz Kamangar, Abdullah A. A. A. Al-Rashed , G. A. Quadir, N. Ameer Ahmad, Salman Ahmed, Yunus Khan T.M. H. M. T. Khaleed, Influence of Radiation on Double Diffusive Flow in a Porous Medium Embedded with Vertical Plate, International Journal of Advanced Thermofluid Research Volume 1, Issue 1, 2015 ISI/SCOPUS Cited Publication.

 

  1. H.M.T. Khaleed, M.F.Addas, M.A. Mujeebu, Abdullah A. Al-Rashed, Irfan Anjum Badruddin, G.A. Quadir, Salman Ahmed N.J, T.M. Yunus khan, Sarfaraz Kamangar, Flash-less Cold Forging of Cup-shaped Object and Stress Analysis of Forging Die using FEM Simulation and Experiment, Australian Journal of Basic and Applied Sciences,  8(24) Special 2014, Pages: 401-410 ISI/SCOPUS Cited Publication.

 

  1.   Irfan Anjum Badruddin, Abdullah A. Al-Rashed, Salman Ahmed N.J., H.M.T. Khaleed, N. Ameer Ahmad, SarfarazKamangar, T.M. Yunus khan Investigation of Discrete Heating At Upper Section of A Porous Annulus, , Australian Journal of Basic and Applied Sciences, 8(24) Special 2015, Pages: 283-289 (ISI-Cited Publication)

 

  1. Ahmed N. J. Salman, Sarfaraz Kamangar, Irfan Anjum Badruddin, Abdullah A. A. A. Al-Rashed, G. A. Quadir, H. M. T. Khaleed, T. M. Yunus Khan conjugate heat transfer in porous annulus, Journal of Porou Media, 17(12), (2014) pp.1109-1119 (ISI/SCOPUS Cited Publication) 0.25

 

  1. Irfan AnjumBadruddin,Salman Ahmed N.J, Abdullah A. Al-Rashed,G.A. Quadir, H.M.T. Khaleed, Sarfaraz Kamangar,T.M. Yunus khan Effect Of Discrete Heater Placed At Bottom Section Of A Porous Annulus, , Australian Journal of Basic and Applied Sciences, 8(24) Special 2014, Pages: 191-199 (ISI-Cited Publication) 0.25

 

  1. A.B. Abdullah, S.M. Sapuan, Z. Samad, H.M.T. Khaleed, N.A. Aziz, Numerical investigation of geometrical defect in cold forging of an AUV blade pin head Original Research Article
    Journal of Manufacturing Processes, 15(10), 2013, pp. 141-150 (SCOPUS, Q1). 0.25

 

  1. A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, “Quality Evaluation of Cold Embossed Hole Based on Profile Measurement Technique”, Advanced Materials Research, 626, 2013, pp. 564-568. (Scopus,Q4). 0.25

 

  1. H.M.T. Khaleed, Z. Samad, M.A.Mujeebu, Badarudin. A, A.B. Abdullah, IA Badruddin, N.J. Salman Ahmed. “Work-piece optimization and Thermal Analysis for Flash-less Cold Forging of AUV Propeller blade - FEM Simulation and Experiment” Arabian Journal for Science and Engineering, 38(9), 2013, pp. 2509-2519. Published by Springer (ISI-Cited PublicationQ3). 0.25
  2. A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, ‘Twist Springback Measurement of Autonomous Underwater Vehicle Propeller Blade Based on Profile Deviation”, American Journal of Applied Sciences, 10(5), 2013, pp. 515-524. (Scopus, ISI,Q2).
  3. 0.25
  4. A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, “Geometrical Defect Evaluation of Cold Embossing AA6061 Based on FEA and Physical Modeling Technique”, Applied Mechanics and Materials, accepted 2012. Published by Trans Tech. Publications. Inc. Switzerland (Scopus, Q4). 0.25

 

  1. A. B. Abdullah, Z. Samad, H.M.T. Khaleed and M. Husaini, “Modular Tooling Concept in the Fabrication of the Precision AUV Blade”, Applied Mechanics and Materials, 372, 2013, pp. 369-372. (Scopus,Q4).  0.25
  2. A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, ‘An investigation of Geometrical Defect of Cold Embossing part Utilizing FEM and Image Processing Technique”, Indian Journal of Engineering and Materials Sciences, Vol 19, 2012, pp. 41-46. (ISI, SCOPUS,Q3). 0.25

 

  1. A. B. Abdullah, S. M. Sapuan, Z. Samad, H. M. T. Khaleed, M. Husaini and N. A. Aziz, Twist Spring back Measurement of AUV Propeller Blade Based on Profile Deviation, Advanced Materials Research Vols. 512-515 (2012) pp 1840-1844. (ISI, SCOPUS, Q4). 0.25

 

  1. A. B. Abdullah, S. M. Sapuan, Z. Samad , M. T. Khaleed and N. A. Aziz, Effect of Die Modification to Geometrical Defect of Cold Forged AUV Propeller Blade, Advanced Materials Research Vol. 576 (2012) pp 133-136, doi:10.4028/www.scientific.net/AMR.576.133, © (2012) Trans Tech Publications, Switzerland. (ISI, SCOPUS, Q4) 0.25

 

  1. H. M.T. Khaleed, Z. Samad, A.R. Othman, A.B.Abdullah FEM Simulation and Experimental Validation of Flash-less Cold Forging for Producing AUV Propeller Blade” Iranian Journal of Science and Technology Vol. 36, No. M1, pp 1-12(2012). (ISI-Cited Publication Q4). 0.5

 

30.  A. B. Abdullah, S. M. Sapuan, Z. Samad, H. M. T. Khaleed and N. A. Aziz, Prediction of geometric defects in the cold embossing of AA6061 aluminum alloy by finite element analysis,  Scientific Research and Essays, Vol. 7(15), pp. 1630-1638, 23 April, 2012,  (ISI, SCOPUS,Q3). 0.25

 

31.  A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, ‘Effect of die shape modifications to the geometrical and dimensional accuracy of cold forging AUV propeller blade”, International Journal of the Physical Sciences, 7(19), 2012, pp. 2745-2754 (ISI, SCOPUS, Q3). 0.25

 

  1. A. B. Abdullah, S. M. Sapuan, Z. Samad, H. M. T. Khaleed and N. A. Aziz, Manufacturing of AA6061 propeller for AUV application using cold forging process, Scientific Research and Essays Vol. 7(2), pp. 170-176, 16 January, 2012 (ISI, SCOPUS,Q3). 0.25
  2. A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, “Investigation of Geometrical Defect of AA6061-T4 Cold Embossing Using FEM”, Applied Mechanics and Materials, 110 – 116, 2012, pp. 2337-2341. Published by Trans Tech Publications inc. Switzerland (Scopus) (ISI-Cited Publication,Q4). 0.25
  3. A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, “Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method”, Advanced Materials Research, 383 – 390, 2012, pp. 8250-8255. (ISI-Cited Publication, Scopus, Q4). 0.25

35.  Irfan Anjum Badruddin, N. J. Salman Ahmed, Abdullah A. A. A. Al-Rashed, Jeevan Kanesan, Sarfaraz Kamangar and H. M. T. Khaleed,(2011). Analysis of Heat and Mass Transfer in a Vertical Annular Porous Cylinder Using FEM, Transport in Porous Media, DOI:10.1007/s11242-011-9867-x. (ISI-Cited Publication, Q1). 0.25

  1. H. M.T. Khaleed,  Z. Samad, A.R. Othman, M.A. Mujeebu,  A.B.Abdullah1,  M.M.Zihad1” Work-piece optimization and Thermal Analysis for Flash-less Cold Forging of AUV Propeller Hubs - FEM Simulation and Experiment ” . Journal of Manufacturing Processes, Volume 13, Issue 1, January 2011, Pages 41-49 (Scopus cited,Q1). 0. 5
  2.  Z. Samad, A. B. Abdullah, H. M. T. Khaleed, M. H. Abu-Bakar and M. R. Arshad, “A Novel Design of Propeller for Underwater Aerial Vehicle (AUV) Using Cold Forging Process”, Indian Journal of Geo-Marine Sciences, accepted July 2011. Published by National Institute of Science Communication and Information Resources (ISI-Cited Publication). 0.25
  3.  A. B. Abdullah, S. M. Sapuan, Z. Samad, H. M. T. Khaleed, “Geometric and Dimensional Error Assessment of Forging Parts: a Survey of Product and Process Design Methods”, International Review of Mechanical Engineering - March 2011 (Vol. 5 N. 3), pp. 553-561. Published by Praise Worthy Prize, Italy. Indexed in (ISI-Cited Publication,Q3). 0.25
  4. H.M.T. Khaleed, Z. Samad, A.R. Othman, Badarudin. A, A,  A.B. Abdullah, . R. Ab-Kadir, IA. Badruddin, N.J. Salman Ahmed. Computer-aided FE simulation for flash-less cold forging of connecting rod, Arabian Journal for Science and Engineering Volume: 36 Issue: 5 Pages: 855-865 DOI: 10.1007/s13369-011-0083-3 Published: AUG 2011 (ISI-Cited Publication,Q3). 0. 5

40.  A. B. Abdullah, S. M. Sapuan, Z. Samad, H. M. T. Khaleed and N. A. Aziz, “Quantitative Evaluation of Geometric and Dimensional Error of Cold Forged AUV Propeller Blade”, Australian Journal of Basic and Applied Sciences. 2011. (ISI, SCOPUS,Q3). 0.25

 

  1. H. M.T. Khaleed, Z. Samad, A.R. Othman, M. A. Mujeebu, A.B. Abdullah A. R. Arshad, A. R. Ab-Kadir, A. Hussaini,  “FEM and Experimental Analysis of Flash-less Cold Forging of Propeller Hubs and Blade of Autonomous Underwater Vehicle“Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 2010(ISI-Cited Publication,Q1). 0.5

 

  1. H. M.T. Khaleed,  Z. Samad, A.R. Othman, M.A. Mujeebu  A.B.Abdullah,  M.M.Zihad” Flash-less Cold Forging and Temperature Distribution in Forged Autonomous Underwater Vehicle Hubs Using FEM Analysis and Experimental Validation: The blade” International J. of Mech. and Materials Engineering. 2010 (SCOPUS-Cited Publication, Q3). 0. 5
  2. R. Ab-Kadir, A. R. Othman, Z. Samad, Khaleed Hussain. M. T. and A. B. Abdullah

“Effect of corner radius and friction parameters on the optimization of the cold forging die design”Modern Applied Science the issue of Vol. 3, No. 2, in February (2009).PP177-189 ,(Q4)

44.  Salman Ahmed.N.J IA Badruddin Z.A.Zainal and Khaleed Hussain M.T, Heat Transfer in a Conical Cylinder with Porous Medium,, International Journal of Heat and Mass Transfer Volume 52, Issues 13-14, June 2009, Pages 3070-3078. (ISI, SCOPUS,Q1). 0.25

 

  1. Zulquernain Mallick, IA Badruddin, Khaleed Hussain M.T, Salman Ahmed N.J,Noise characteristics of grass trimming machine engine and its effect on operators , Noise & Health Year 2009, Volume 11, Issue 43, 98-102. (ISI, SCOPUS,Q1). 0.25

 

 

  1. Farhad B. Bahaideen Ahmed M. Saleem, Khaleed Hussain M.T, Zaidi Mohd. Ripin, Z.A.Ahmad   Zahurin Samad, A.A.Mohamad, ”Fatigue Behaviour of Aluminum Alloy at Elevated Temperature” . Modern Applied Science Vol 3, No 4 (2009) pp45-52,Q4.

 

  1. Othman Sidek,  Muhamad Azman Miskam, H.M.T. Khaleed, Mohd Fauzi Alias,Shukri Korakkottil Kunhi Mohd Optimal Design of Capacitive Micro Cantilever Beam Accelerometer” . Modern Applied Science  (Vol. 3, No. 9 in Sep. 2009, Q4).

 

  1. Khaleed Hussain M.T, Zahurin Samad, S.C.Pilli, Salman Ahmed N.J, IA Badruddin, Hakim SS, Quadir G A, A study on Cold Forging Die Design Using Different Techniques, .Modern Applied Science. Issue of Vol. 3, No. 3, in March 2009 PP143-154, (Q4).

 

  1. M.T .Khaleed Hussain, Zahurin Samad, S.Suhaib , A.R.Uthman ,   S.A.Jagirdar,IA Badruddin   Zulquernain Mallick,Zahid A.Khan, ,G. A Quadir . Analysis of Stress Concentration Factor in bolted Joint Using Finite Element Method, International journal of mechanical and materials engineering vol 3(2008),no 1,PP38-45. (SCOPUS-Cited Publication Q3)

 

  1. Khaleed Hussain M.T, Zahurin Samad, S.Suhaib, A.R.Uthman and  A R.Ab-Kadir . A Review on Cold Forging Die Design and die design process, International journal of Applied Engineering Research vol  3,no 3(2008),PP409-430. (ISI Cited, Q4).

 

  1. K.H. Mohammed-Tandur, IA Badruddin, Computing the Stress Concentration Factor in Bolted Joint Using FEM, International journal of Applied Engineering Research vol 3, no 3(2008),PP369-387.( ISI,Q4)

 

  1. Salman Ahmed.N.J, Z.A.Zainal , IA Badruddin,   Khalid Hussain.M.T, Heat transfer analysis of porous medium in a conical cylinder with variable wall temperature” International Journal on Mechanical and Materials Engineering, 2008 (SCOPUS,ISI-Cited Publication,Q3). 0.25

 

 

  1. Zulquernain Mallick, IA Badruddin    Abid Haleem Arshad Noor Siddique ,Khaleed H.Tandur,    Ergonomic Evaluation of Data Entry Task Performance Under The Influence of Noise and Task Structure-The Effect of Gender. International journal of mechanical and materials engineering vol 2(2007),no 2,PP161-172. (SCOPUS,ISI-Cited Publication,Q3). 0.25

 

  1. Zulquernain Mallick, IA.Badruddin, Khaleed H.Tandur, Operational Characteristics Optimization of Human-Computer System. IIUM Engineering Journal vol 2(2007),no 2, PP161-172.

 

 

1.    Conference Proceedings

 

  1. T.F. Chiam, Y.H. Leong, Wong, H.M., I.A. Badarudeen, Khaleed, H.M.T., P.A.A. Narayana, Stand-alone Wind Diesel Hybrid System in Pulau Tuba, Proceedings of  Energy- 2008, Jan 31-Feb 01, 2008, NIT Calicut, Kerala, India, pp. 195-202.

 

  1. A R.Ab-Kadir   A.R.Uthman , Z. Samad , S.Sahudin ,Khalid H.M.T and A.B.Abdullah,  Numerical Analysis to Optimize the Cold Forging Die Design, Proceedings of  Product and Design 2007 December 10-11,2007, Park Royal Hotel & Resort,Batu Ferringhi Penang Malaysia, pp. 82-85.

 

  1. IA.Badruddin, Salmanahmed.N.J, Z,A,Zainal,Khaleed Hussain.M.T, Jeevan Kanesan,”Natural Convection through Porous Medium Inside Conical Cylinder with Variable Wall Temperature”International Conference on micro electromechanical system.October 2008,AEC Bhatkal India.P-64-71.

 

  1. IA Badruddin,Salmanahmed.N.J,Z,A,Zainal,Khaleed Hussain.M.T,Jeevan Kanesan,”Heat Transfer Analysis of Porous Medium in a Conical Cylinder with Variable Wall Temperature.”35thInternational Conference on Fluid Power and Fluid Mechanics,DECEMBER 2008,PES College Bangalore,India.P-470-479.

 

  1. H. M.T. Khaleed, Z. Samad, A.R. Othman, M. A. Mujeebu, A. R. Ab-Kadir, A.B. Abdullah, I.B. Magami2, N.J. Salman  Ahmed1 and G.A.Quadir Jeevan Kanesan Flash-less Cold Forging of Connecting Rod Using Computer-aided FE Simulation“international conference on applications and design in mechanical engineering”(icadme 2009) Malaysia11-13, october 2009.

 

  1. H. M.T. Khaleed, Z. Samad, A.R. Othman, M.A. Mujeebu,  A. Hussaini,  A.B. Abdullah.     G.A. Quadir, “FEM Analysis and Experimental Validation of  Flash-less Cold Forging of Autonomous Underwater Vehicle Hubs“International conference on applications and design in mechanical engineering”(ICADME 2009) Malaysia 11-13, October 2009.

 

7.     Zahurin Samad, K-Hussain M-Tandur, A-Rahim Othman, M-Hussaini A-Bakar, A-Baharuddin Abdullah.FEM Analysis and Flash-less Cold Forging of AUV Propeller Blade “Proceedings of The 2nd ASEAN University Network / Southeast Asia Engineering Education Development Network Regional Conference on Manufacturing Engineering 7-8 December 2009 Bandung, Indonesia A71-A77.

 

8.     H. M.T. Khaleed, Z. Samad, A.R. Othman, A.B. Abdullah A. R. Arshad, A. R. Ab-Kadir and A. Hussaini,  “FEM Analysis and Flash-less Cold Forging of Propeller PartA Front and Back Hubs of Autonomous Underwater Vehicle”, Mechanical Engineering Research Colloquium September 2009, pp. 12.

 

 

9.      A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, ‘Investigation of Geometrical Defect of AA6061-T4 Cold Embossing Using FEM”, The 2011 International Conference on Mechanical and Aerospace Engineering, ICMEA 2011, Bangkok – July 2011.

 

10.   A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, ‘Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method”, The 2011 International Conference on Manufacturing Science and Technology (ICMST 2011), Singapore. Accepted. ICMST, Singapore – September 2011.

 

11.   A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, Investigation of Geometrical Defect in Cold Embossing of Pin Head, ICMER, Kuantan, Pahang – December 2011.

 

12.  A. B. Abdullah, S.M. Sapuan, Z. Samad, H. M. T. Khaleed, and N. A. Aziz, Twist Springback Measurement of AUV Propeller Blade Based on Profile Deviation ICAMMP, Guilin, China – December 2011.

 

  1. Salman Ahmed N.J, H.M.T. Khaleed, Sarfaraz Kamangar, T.M.Yunus Khan, Mixed Convection Opposing Flow in a Vertical Porous Annulus-Two Temperature Model, , AIP Publishing, ACCEPTED (ISI)..0.25

 

  1. AbdulgaphurAthani, Abdullah A.A.A. Al-Rashed, H.M.T. Khaleed, Opposing Flow in Square Porous Annulus: Influence of Dufour Effect, AIP Publishing, ACCEPTED(ISI).. 0.25

 

  1. Abdullah A.A.A. Al-Rashed, AbdulgaphurAthani, H.M.T. Khaleed, Soret Effect Due to Opposing Flow in Square Porous Annulus, AIP Publishing, ACCEPTED(ISI).. 0.25

 

  1. Abdullah A.A.A. Al-Rasheda*, Salman Ahmed N.Jb, H.M.T. Khaleed,T.M.Yunus Khanb,Sarfaraz Kamangarb,  Thermal Non-Equilibrium Analysis of Porous Annulus Subjected to Segmental Isothermal Heater-Part A, ICNAAM15 ACCEPTED(ISI).. 0.25

 

  1. Abdullah A.A.A. Al-Rasheda*, Salman Ahmed N.J, H.M.T. Khaleed,,T.M.Yunus Khanb,Sarfaraz Kamangar,  Thermal Non-Equilibrium Analysis of Porous Annulus Subjected to Segmental Isothermal Heater-Part B, ICNAAM15 ACCEPTED(ISI).. 0.25

 

  1.  Salman Ahmed N.J1, Abdullah A.A.A. Al-Rashed2*, Sarfaraz Kamangar1, T.M.Yunus Khan1, H.M.T. Khaleed, Effect of Segmental Heating on Mixed Convection Aiding Flow in a Vertical Porous Annulus , ICNAAM15 ACCEPTED(ISI).. 0.25

 

  1. Salman Ahmed N.J1, Sarfaraz Kamangar1, Abdullah A.A.A. Al-Rashed2*, T.M.Yunus Khan1, H.M.T. Khaleed, Mixed Convection Opposing Flow in Porous Annulus, , ICNAAM15 ACCEPTED(ISI).. 0.25

 

  1. Salman Ahmed N.J1, Abdullah A.A.A. Al-Rashed3, Sarfaraz Kamangar2, H.M.T. Khaleed, T.M.Yunus Khan2,4*, AbdulgaphurAthani,  Mixed Convection Aiding Flow in a Vertical Porous Annulus-Two Temperature Model, IConAMMA ACCEPTED(ISI).. 0.25

 

  1. Abdullah A.A.A. Al-Rashed3, Salman Ahmed N.J1, H.M.T. Khaleed, T.M.Yunus Khan2,4*, K.S. Nazim Ahamed, Mixed Convection Opposing Flow in a Vertical Porous Annulus-Two Temperature Model, IConAMMA ACCEPTED(ISI).. 0.25
  2. Azeem; Khaleed, H. M. T.; Soudagar, Manzoor Elahi M Fem Formulation of Heat Transfer in Cylindrical Porous Medium Science Date: JUL 03-04, 2017 INTERNATIONAL CONFERENCE ON MATERIALS, ALLOYS AND EXPERIMENTAL MECHANICS (ICMAEM-2017).
  3. Fahimuddin Mulla, Khalid. M. Pallan, and Khaleed H. M. T ,Influence of radius ratio on heat transfer in porous annulus Mohammed. (2018); doi: 10.1063/1.5033234 View online: https://doi.org/10.1063/1.5033234 View Table of Contents: http://aip.scitation.org/toc/apc/1953/1 Published by the American Institute of Physics

 

  1. Khaleed, H.M.T., Athani, A., Khan, T.M.Y., Govindaraju, K. Heat transfer in a conical porous medium due to inner and top surface heating: Effect of cone angle, 2018     AIP Conference Proceedings

 

  1. H. M. T. Khaleed, Abdulgaphur Athani, T. M. Yunus Khan, and Kalimuthu Govindaraju Heat transfer in a conical porous medium due to inner and top surface heating: Effect of cone angle Citation: AIP Conference Proceedings 1953, 140050 (2018); doi: 10.1063/1.5033225 View online: https://doi.org/10.1063/1.5033225 View Table of Contents: http://aip.scitation.org/toc/apc/1953/1 Published by the American Institute of Physics.

 

 

  1. Khaleed H. M. T., Khalid. M. Pallan, and Mohammed Fahimuddin Mulla Heat transfer in porous annulus: Effect of aspect ratio Citation: AIP Conference Proceedings 1953, 140056 (2018); doi: 10.1063/1.5033231 View online: https://doi.org/10.1063/1.5033231 View Table of Contents: http://aip.scitation.org/toc/apc/1953/1 Published by the American Institute of Physics

27.  Azeem, Baig, M.A.A., Khaleed, H.M.T., 2019, Conjugate heat transfer in an annulus due to partial heating-part I, AIP Conference Proceedings,

 

28.  Azeem, Khaleed, H.M.T., Baig, M.A.A., 2019, Conjugate heat transfer in an annulus due to partial heating-part II, 2019   AIP Conference Proceedings.

 

29.  Ahamad, N.A., Baig, M.A.A., Salman Ahmed, N., (...), Badruddin, I.A., Khaleed, H.M.T., 2019, Conjugate heat transfer due to partial isothermal heating at center of annuls with two solids in porous annulus: Part I,

 

30.  Azeem, Baig, M.A.A., Khaleed, H.M.T., Kamangar, S., Badruddin, I.A., 2019, Partial heating at lower section of annulus subjected to conjugate heat transfer in porous AIP Conference Proceedings.

 

31.  Khaleed, H.M.T., Ahamad, N.A., Salman Ahmed, N., Baig, M.A.A., 2019, Conjugate heat transfer due to partial isothermal heating at center of annuls with two solids in porous annulus: Part II, AIP Conference Proceedings.

 

32.  Salman Ahmed, J.N., Khaleed, H.M.T., Baig, M.A.A., Khan, T.M.Y., Kamangar, S., 2019, Effect of viscous dissipation on aiding flow heat and mass transfer in porous cavity, AIP Conference Proceedings.,

 

33.  Khaleed, H.M.T., Salman Ahmed, J.N., Khan, T.M.Y., Kamangar, S., Baig, M.A.A., 2019,  Influence on opposing flow due to viscous dissipation in porous cavity, AIP Conference Proceedings.

 

34.  Ahamad, N.A., Baig, M.A.A., Ahmed, N.J.S., ...Reddy, A.R., Khaleed, H.M.T. “Finite element formulation of conjugate heat transfer in porous annulus” AIP Conference Proceedingsthis link is disabled, 2020, 2204, 040016.

 

35.  Baig, M.A.A., Azeem,, Ahmed, N.J.S., ...Reddy, A.R., Khaleed, H.M.T, “Finite element formulation of conjugate double diffusion in porous annulus” AIP Conference Proceedingsthis link is disabled, 2020, 2204, 040017.

 

36.  Ameer Ahamad, N., Azeem,, Khaleed, H.M.T., Ahmed Ali Baig, M.” Effect of Inner and Outer Horizontal wall Heating on Porous Duct” Materials Today: Proceedingsthis link is disabled, 2020, 24, pp. 1416–1423.

 

37.  Khaleed, H.M.T, Development of FCAR for Mechanical Engineering Course to Improve the Student’s Performance Using Evaltool. AIP conference proceedings