Book
[1] S. Z. Khan, 'Nanoparticles by Continuous-wave Laser Ablation in Liquid: Generation and Characterization' LAP LAMBERT Academic Publishing, 2011.
Journal Papers
[2]
Mahmoud, Essam RI; Tirth, Vineet; Algahtani, Ali; S. Z. Khan; ‘Microstructural characterization of different metal matrix
composite claddings reinforced by TiC through YAG laser cladding’,
Materials Research Express, 2020.
[3]
S.
Z. Khan; Mustahsan, Farrukh; Mahmoud, Essam RI; Masood, SH;
‘A novel modified re-entrant honeycomb structure to enhance the auxetic
behavior: Analytical and numerical study by FEA’, Materials Today:
Proceedings Elsevier, 2020.
[4]
Zaidi, Asad A; S. Z. Khan; Shi, Yue; ‘Optimization of nickel nanoparticles concentration for
biogas enhancement from green algae anaerobic digestion’, Materials Today:
Proceedings Elsevier, 2020.
[5]
Mahmoud, Essam RI; S. Z. Khan; Ejaz, Muhammad; ‘Laser surface cladding of mild steel with 316L
stainless steel for anti-corrosion applications’, Materials Today: Proceedings
Elsevier, 2020.
[6]
Mahmoud, Essam RI; Algahtani, Ali; S.
Z. Khan; Ahmed, Gulam M. Sayeed; ‘Characterizations of
Cladded 6082-T6 Aluminum Alloy Through Hard Anodizing’, Science of Advanced
Materials, Vol. 12, issue 7, p.1034-1045, 2020.
[7]
Ejaz, Muhammad; Mahmoud, Essam RI; S.
Z. Khan; ‘The investigation of the fatigue failure of
nickel-based superalloy 718 choke valve stems used in offshore subsea water
injection service’, Engineering Failure Analysis, Vol. 110, p.104434, 2020.
[8]
Khalid, M Saeed; Nisar, Salman; S.
Z. Khan; Khan, Muhammad Ali; Troesch, Armin W; ‘Simulation
of blended nonlinear hydrodynamics forces using radial basis function in
uniform moving frame’, Ocean Engineering, Vol. 198, p.106994, 2020.
[9]
KA Khan, S Al-Mansoor, S. Z. Khan, MA Khan, ‘Piezoelectric Metamaterial with Negative and Zero
Poisson’s Ratios’, Journal of Engineering Mechanics, Vol. 145, issue 12, 2019.
[10]
AA Zaidi, F RuiZhe, A Malik, S. Z. Khan, AJ Bhutta, Y Shi, K Mushtaq, 'Conjoint effect of microwave
irradiation and metal nanoparticles on biogas augmentation from anaerobic
digestion of green algae', International Journal of Hydrogen Energy Vol. 44,
Issue 29, 2019.
[11]
MA Khan, MA Shahid, SA Ahmed, S. Z. Khan, KA Khan, SA Ali, M Tariq, 'Gear misalignment diagnosis using
statistical features of vibration and airborne sound spectrums',
Measurement, 2019.
[12]
S.
Z. Khan, SH Masood, E Ibrahim, Z Ahmad, 'Compressive
behaviour of Neovius Triply Periodic Minimal Surface cellular structure
manufactured by fused deposition modelling', Virtual and Physical
Prototyping, 2019.
[13]
A Mujtaba, M Shahzad, A Mansoor, AN Saquib, KA Khan, M Asif, S. Z. Khan, 'Prediction of Crack Depth and Fatigue Life of an Acrylonitrile
Butadiene Styrene Cantilever Beam Using Dynamic Response', Journal of
Testing and Evaluation 48 (2), 2019.
[14]
BA Zai, MA Khan, A Mansoor, S. Z. Khan, KA Khan, 'Instant dynamic response measurements for crack monitoring
in metallic beams', Insight-Non-Destructive Testing and Condition
Monitoring 61 (4), p,222-229, 2019.
[15]
HM Waqas, D Shi, M Imran, S. Z. Khan, L Tong, AA Zaidi, J Iqbal, W Ahmed, 'Conceptual Design of Composite
Sandwich Structure Submarine Radome', Materials 12 (12), 1966, 2019.
[16]
A Zaidi, R Feng, A Malik, S. Z. Khan, Y Shi, A Bhutta, A Shah, 'Combining microwave pretreatment with iron
oxide nanoparticles enhanced biogas and hydrogen yield from green algae’,
Processes vol. 7, Issue 1, 2019.
[17]
U Zahid, S. Z. Khan, MA Khan, HJ Bukhari, S Nisar, KA Khan, ‘A methodology for
flexibility analysis of pipeline systems', Proceedings of the Institution
of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018.
[18]
A. Algahtani, E.R.I. Mahmoud, S. Z. Khan and V. Tirth, 'Experimental Studies on Corrosion Behavior of Ceramic
Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum
Alloy', Processes Vol. 6, Issue 12, 2018.
[19] Asad A Zaidi, Feng RuiZhe, Yue Shi, S. Z. Khan, Kashif Mushtaq, 'Nanoparticles augmentation on
biogas yield from microalgal biomass anaerobic digestion', International Journal of Hydrogen Energy, 2018.
[20] M.A. Khan, K.A. Khan, S.
Z. Khan, S. Nisar, A. Starr, ‘Fracture life estimation
of Al-1050 thin beams using empirical data and a numerical approach; Insight-Non-Destructive
Testing and Condition Monitoring, Vol. 60, Issue 7, p363, 2018.
[21] Zai, B., Khan, M., Park, M., Shahzad, M., Shahzad,
M., Nisar, S., S. Z. Khan, Khan, K., and Shah, A., ‘Low-Velocity Impact Characterization of
Fiber-Reinforced Composites with Hygrothermal Effect,’ Journal of Testing
and Evaluation, https://doi.org/10.1520/JTE20170620. ISSN 0090-3973, 2018.
[22] M. Asif, M.A. Khan, S.
Z. Khan, R.S. Choudhry and K.A. Khan, 'Identification of
an effective nondestructive technique for bond defect determination in laminate
composites—A technical review', Journal
of Composite Materials, Vol. 52, Issue 26, 2018.
[23] M. Tariq, S. Nisar, A. Shah, T. Mairaj, S. Akbar, M.A.
Khan and S. Z. Khan, 'Effect of carbon fiber winding layer on
torsional characteristics of filament wound composite shafts’, Journal of the Brazilian Society of
Mechanical Sciences and Engineering, Vol.40, Issue 4, p.198, 2018.
[24] M. Tariq, S. Nisar, A. Shah, S. Akbar, M.A. Khan and S.
Z. Khan, 'Effect of hybrid reinforcement on the performance of
filament wound hollow shaft', Composite Structures, Vol.184, p.378, 2018.
[25]
U. Zahid, S. Z. Khan,
M.A. Khan, H.J. Bukhari, I. Ahmed and K.A. Khan, ‘A methodology for
flexibility analysis of process piping’, J
Process Mechanical Engineering, Part E, https://doi.org/10.1177/0954408917738963,
2017.
[26]
M.Z. Siddiqui, S. Z. Khan,
M. A. Khan, M. Shahzad, K. A. Khan, S. Nisar, D. Noman, ‘A Projected Finite
Element Update Method for Inverse Identification of Material Constitutive
Parameters in Transversely Isotropic Laminates’,
Experimental Mechanics, Vol. 57, Issue 5, p.755, 2017.
[27]
S.
Z. Khan, S. Masood, R. Cottom, ‘Mechanical properties of a novel plymetal
manufactured by laser-assisted direct metal deposition’, International Journal of Advanced Manufacturing Technology, Vol.
91, Issue 5-8, p.1839, 2017.
[28]
M. A. Khan, K. Basit, S. Z. Khan,
K. A. Khan, A.G. Starr, ‘Experimental
assessment of multiple contact wear using airborne noise under dry and
lubricated conditions’, Proceedings of the Institution of Mechanical
Engineers, Part J: Journal of Engineering Tribology, Vol. 231, Issue 12, p1503,
2017.
[29]
S.
Z. Khan, M. A. Khan, M. Tariq, K. A. Khan, T. M. Khan, Taha
Ali, ‘Response of Gaussian-modulated
Guided Wave in Aluminum: An Analytical, Numerical and Experimental Study’,
Journal of Mechanical Engineering Science, Part C, Vol. 231, Issue 16, p3057, 2017.
[30]
F. Saleem, S. Nisar, M. A. Khan, S.
Z. Khan, M. A. Sheikh, 'Overall equipment effectiveness of tyre curing press: a case study', Journal of Quality in Maintenance
Engineering, Vol. 23, Issue 1, p39, 2017.
[31]
R. S. Choudhry, K. A. Khan, S.
Z. Khan and M. A. Khan, ‘Micromechanical
Modeling of 8-Harness Satin Weave Glass Fiber Reinforced Composites’, Journal
of Composite Materials, Vol. 51, Issue 5, p.705, 2017.
[32]
A Rafey Khan, S Nisar, A Shah, MA Khan, S. Z.
Khan, MA Sheikh 'Reducing
machining distortion in AA 6061 alloy through re-heating technique’,
Materials Science and Technology, Vol. 33, Issue 6, p731, 2017.
[33]
W. Saqib, H. Sherazi, M. A. Khan, S. Z. Khan, K. A. Khan, ‘An Intelligent System for Machinery
Condition Monitoring using Evolutionary Algorithms’, Insight-
Non-Destructive Testing and Condition Monitoring, Vol. 58, Issue 12, p656, 2016.
[34]
K.A. Khan, S. Z. Khan,
M. A. Khan, ‘Effective Thermal
Conductivity of Two-Phase Composites Containing Highly Conductive Inclusions’, Journal
of Reinforced Plastics and Composites, Vol. 35, Issue 21, p1586, 2016.
[35]
S.
Z. Khan, T. M. Khan, Y. F. Joya, M. A. Khan, S. Ahmed and A.
Shah, ‘Assessment of material properties
assessment of AISI 316L stainless steel using non-destructive evaluation
technique’, Nondestructive Testing and Evaluation, Vol.31, Isuue 4, p.360, 2016.
[36]
M. B. Kadri, S. Nisar, S. Z.
Khan and W. A. Khan, ‘Comparison
of ANN and finite element model for the prediction of thermal stresses in diode
laser cutting of float glass’, Optik - International Journal for Light and
Electron Optics, Vol. 126, Issue 19, p1959, 2015.
[37]
M. A. Khan, M. Cheema, S. Z.
Khan and S. Rehman, ‘Image Based Portable Wear Debris Analysis Tool’,
Industrial Lubrication and Tribology, Vol. 67, Issue 4, p389, 2015.
[38]
M. A. Khan, S. Z. Khan,
W. Sohail, H. Khan, M. Sohaib and S. Nisar, ‘Mechanical
fatigue in aluminium at elevated
temperature and remaining life prediction based on natural frequency evolution’,
Fatigue & Fracture of Engineering Materials & Structures. Vol. 38,
Issue 8, 2015.
[39]
S. Nisar, S. Z.
Khan, M. Ali, L. Li and M. A. Sheikh, ‘Comparison of Cut Path Deviation Between CO2 and Diode
Lasers in Float-Glass Cutting’, Journal of Russian Laser Research, Vol. 35,
Issue 2, p182-192, 2014.
[40]
K. Bari, S. Z.
Khan, T. Lowe and J. K. Farooqi, ‘Measurement
of thermal diffusivity for alumina borosilicate glass bearing TRISO fuel
particles: experiment and modelling correlation’, Journal of
Materials Science, Vol. 48, Issue 14, p4866, 2013.
[41]
S. Z. Khan
Z. Liu and L. Li, ‘Characteristics of γ-Al2O3 nanoparticles
generated by continuous-wave laser ablation in liquid’, Applied Physics A, No. 4, Vol. 101, p781, 2010.
[42]
S.
Z. Khan, Y. Yuan, A. Abdolvand, M. Schmidt, P. L. Crouse,
Lin Li, Zhu Liu, M. Sharp, and K. Watkins, ‘Generation
and characterization of NiO nanoparticles by continuous wave fiber laser
ablation in liquid’, Journal of Nanoparticle Research, No. 6, Vol. 11, p1421,
2009.
[43]
Z. Liu and S. Z. Khan, Y.
Yuan, A. Abdolvand, D. Whitehead, M. Schmidt and L. Li, ‘Generation of metal-oxide nanoparticles using continuous wave fibre
laser ablation in liquid’, Journal of Micromechanics & Microengineering
Vol. 19, p054008, 2009.
[44]
A. Abdolvand and S. Z. Khan,
Y. Yuan, P.L. Crouse, M. Schmidt, M. Sharp, Zhu Liu and Lin Li, ‘Generation of titanium-oxide
nanoparticles in liquid using a high-power, high-brightness continuous-wave fibre laser’,
Applied Physics A, No. 3, Vol. 91, p365, 2008.
Refereed Conference Papers
[45]
S.
Z. Khan, U Ahmed, S Qazi, S Nisar, MA Khan, KA Khan, F
Rasheed, M Farhan, 'Frequency and Amplitude Measurement of A Cantilever Beam
Using Image Processing: With A Feedback System', 16th International
Bhurban Conference on Applied Sciences and Technology (IBCAST), p. 888-895, 2019.
[46]
G. K. Maharjan, S. Z. Khan, S. H. Riza, S. H. Masood, ‘Compressive Behaviour of 3D Printed
Polymeric Gyroid Cellular Lattice Structure’, IOP Conference Series: Materials
Science and Engineering 455 (1), 2nd International Conference on Advancements
in Aeromechanical Materials for Manufacturing, Telangana, India, Jul 13-14,
2018.
[47]
S.
Z. Khan, M. A. Khan, M. Tariq, K. A. Khan, Tariq M Khan,
Taha Ali, ‘Gaussian-modulated sinusoidal wave propagation in an aluminum plate:
A computational and experimental study’,
NED-IEP 6th International Mechanical Engineering Congress – Karachi,
Pakistan, Jul 15-17, 2016.
[48]
M. A. Khan, Kanza Basit, S. Z.
Khan, K. A. Khan, ‘Acoustic emission
for evaluating point contact wear under dry and lubricated conditions’, NED-IEP 6th
International Mechanical Engineering Congress – Karachi, Pakistan, Jul 15-17, 2016.
[49]
S.
Z. Khan, S.H. Masood and R. Cottam, ‘Mechanical properties in tensile loading of H13 re-entrant honeycomb
auxetic structure manufactured by direct metal deposition’, International
Conference on Mechatronics and Mechanical Engineering (ICMME 2015), Singapore, Sep,
15-16, 2015.
[50]
S.
Z. Khan, M. A. Khan, H. Ahmed, A. Z. Abedeen, T. Gulfaraz and H. Haq, ‘Temperature
prediction of a solid body by two-color
method using image-processing technique’, NED-IEP 5th International
Mechanical Engineering Congress – Karachi, Pakistan, May 9-10, 2015.
[51]
M Asif, M. A. Khan, S. Z. Khan,
‘Identification of an effective
non-destructive technique for weak bond identification in laminate composites -
a technical review’, 3rd ASEAN-
Pakistan conference on materials science (APCoMS-3), NUST, Islamabad, Pakistan,
Dec 25 to 27, 2014.
[52]
S.
Z. Khan, L. Li, and Z. Liu, ‘Generation and characterisation
of aluminium-oxide nanoparticles by CW
laser ablation in liquid’, Conference
on Laser Ablation (COLA 09) – Singapore, (ID: 534), Nov 22-27, 2009.
[53]
Z. Liu, S. Z. Khan, Y.
Yuan, A. Abdolvand, D. Whitehead, M. Schmidt and L. Li, ‘Generation of Ti and Ni-oxide nanoparticles using CW fibre laser
ablation in liquid’, The 1st International Conference on Nanomanufacturing
(nanoMan2008) – Singapore, July 13-16,
2008.
[54]
S.
Z. Khan, Y. Yuan, A. Abdolvand, P. Crouse, M. Schmidt, L.
Li and Z. Liu, ‘Generation of the nickel
nanoparticles by CW laser ablation in liquid’, Pacific International
Conference on Applications and Optics (PICALO 08) – Beijing, China, organised
by Laser Institute of America (LIA), (ID: P201), Apr 16-18, 2008.
[55]
S.
Z. Khan, Y. Yuan, A. Abdolvand, P. Crouse, M. Schmidt, L.
Li and Z. Liu, ‘Laser-assisted generation
of metal oxide nanoparticles in liquid: characterisation and phase
investigation’, 27th International Congress on Applications of
Lasers & Electro – Optics (ICALEO 07), Orlando, USA, organised by Laser
Institute of America (LIA), (ID: N205), Oct
29 - Nov 1, 2007.
[56]
S.
Z. Khan, A. Abdolvand, Y. Yuan, M. Schmidt, P. Crouse, Z.
Liu and L. Li, Pulsed laser ablation in liquid for generation of copper and
titanium oxide nanoparticles Nanoparticles for European Industry, – London, UK,
Oct 24-25, 2007.
[57]
S.
Z. Khan, Y. Yuan, A. Abdolvand, P. Crouse, M. Schmidt, L.
Li and Z. Liu, 'Comparison studies on
generation of nanoparticles using cw and pulsed laser ablation in liquid
environment’, Conference on Laser Ablation (COLA 07) – Tenerife, Spain, organised
by Ministry of Education, Spain and Institute of Optics, Spain, (ID: PTU-11), Sep 24-28, 2007.
[58]
A. Abdolvand, S. Z. Khan,
M. Schmidt, P. Crouse, Y. Yuan, Z. Liu, L. Li, M. Sharp and K. Watkins, ‘Efficient generation of titanium oxide
nanomaterials using a continuous wave
high-power fibre laser’, CLEO/Europe and IQEC 2007 Conference, Munich,
Germany organised by Optical Society of America, (ID: CM2_5), DOI: 10.1109/CLEOE-IQEC.2007.4386665,
Jun 17-22, 2007.
[59] S. Z. Khan, Y. Yuan, A. Abdolvand, P. Crouse, M. Schmidt, L. Li and Z. Liu, ‘Characterisation and phase investigation in
titanium oxide nanoparticles generated by laser ablation in liquid’,
NanoMaterial 07: Inspiring Commercial Success, - The Sage Gateshead, UK, 30 Apr - 1 May, 2007.
International Seminars, Workshops and
Tutorials
[60]
S.
Z. Khan and Dr. Bilal A. Khawaja, Tutorial session
conducted on the topic of “Lasers: From basics to their applications in
Nanotechnology and Optical Communication Systems” at 14th IEEE
International Multi-topic Conference (INMIC 2011), Karachi, Pakistan, Dec 22-24, 2011. (http://www.inmic2011.org/TT3.html).
[61] S. Z. Khan, 'CW fibre laser production of
nanoparticles’, North West Laser Engineering Consortium, (NWLEC) meeting
presentation for Developments in Industrial
Photonics at Daresbury Science and Innovation Campus, Warrington, Cheshire,
UK, Organised by NWLEC and The Association of laser users (AILU), UK, Jun 5, 2008. (http://tinyurl.com/34g22q5).
[62] S. Z. Khan, 'CW fibre laser production of
nanoparticles’, The Association of laser users (AILU) workshop presentation
for Industrial opportunities in laser
micro and nano processing at Daresbury Science and Innovation Campus,
Warrington, Cheshire, UK, organised by AILU, UK, Jun 4, 2008.
Seminars and Technical Presentations
[63]
Sohaib Zia Khan, ‘Laser material
interaction in nano, micro and macro application’ National Symposium on
Micro & Nanotechnoloy (MNT) and Control of Systems On Network (CoSoN),
PNEC, Karachi, 11 Apr 2014.
[64]
S.
Z. Khan, Zhu Liu and Lin Li, 'Generation of metal oxide nanoparticles by CW laser ablation in liquid’,
Research Postgraduate Conference, School of Mechanical, Aerospace and Civil
Engineering (MACE), Manchester, UK, Jun
11, 2009.
[65]
S.
Z. Khan Zhu Liu and Lin Li, ‘Generation of nanoparticles by CW laser ablation in liquid’,
Research Postgraduate Conference, School of Materials, Manchester, UK, May 21-23, 2009.
[66]
S.
Z. Khan, 'Mechanism
of Nanoparticles Generation by CW Laser Ablation in liquid', at Laser
Processing and Research Centre, (LPRC), The University of Manchester,
Manchester, UK, May 5, 2009.
[67]
S.
Z. Khan, A. Abdolvand, Zhu Liu and Lin Li, 'Generation of titanium-oxide nanoparticles
by continuous wave laser ablation in liquid’, Research Postgraduate
Conference, School of Mechanical, Aerospace and Civil Engineering (MACE),
Manchester, UK, Jun 27, 2008.
[68]
S.
Z. Khan, ‘Laser
Generation of Nanoparticles', at NorthWest Laser Engineering Consortium
(NWLEC) meeting, at The University of Manchester, Manchester, UK. May 27, 2008.
[69]
S.
Z. Khan, 'Generation
of Nanoparticles', at Corrosion and Protection Centre (CPC), The University
of Manchester, Manchester, UK, organised by Laser group at CPC, The University
of Manchester, 22 May 2008.
[70]
S.
Z. Khan, Zhu Liu and Lin Li, ‘Generation and characterisation of metal-oxide nanoparticles’,
Research Postgraduate Conference, School of Materials, Manchester, UK, May 19-21, 2008.
[71]
S.
Z. Khan, 'Generation
of Nanoparticles by laser ablation', at The University of Manchester,
Manchester, UK, organised by Micro and Nano group, The University of
Manchester, 29 April 2008.
[72]
S.
Z. Khan, 'Laser
Generation of Nanoparticles' at Lairdside Laser Engineering Centre (LLEC),
The University of Liverpool, UK, organised by NorthWest Laser Engineering
Consortium (NWLEC), UK, 6 Jan 2008.
[73]
S.
Z. Khan, 'Laser
ablation in liquid for generation of oxide nanoparticles', at Laser
Processing and Research Centre (LPRC), The University of Manchester,
Manchester, UK, organised by Laser group technical seminar, 8 Nov 2007.
[74]
S.
Z. Khan, 'Laser
Generation of Nanoparticles', at Laser Processing and Research Centre
(LPRC), The University of Manchester, UK, organised by NorthWest Laser
Engineering Consortium (NWLEC), UK, 11
Oct 2007.
[75]
A. Abdolvand, S. Z. Khan
Y. Yuan, M. Schmidt, P. Crouse, Z. Liu, M. Sharp, L. Li, and K. Watkins, ‘Laser ablation of solids in liquid for
efficient generation of metallic nanoparticles’, 2nd NorthWest
Laser Engineering Consortium (NWLEC) Conference, at The University of
Manchester, Manchester, UK, organised by NWLEC, Mar 5, 2007.
[76]
S.
Z. Khan, Y. Yuan, and Z. Liu, ‘Laser Generation of Nanoparticles’, Postgraduate Conference, School
of Materials, Manchester, UK, May 14-16,
2007.
[77] S. Z. Khan, Y. Yuan, A. Abdolvand, P. Crouse, M. Schmidt, L. Li and Z. Liu, ‘Generation of titanium-oxide nanoparticles
by continuous wave laser ablation in liquid, Graduate Research Conference,
Manchester, UK, organised by The University of Manchester, Jun 12, 2007.
Magazine publications
[78] Materials World, ‘Nanoparticle production’,
Link: http://www.iom3.org/news/nanoparticle-production?c=574
published by Institute of Material, Mineral and Mining (IOM3), Oct 2, 2007.
[79] Research news in Optics.org, ‘Fibre laser boosts nanoparticle production’,
Link: http://optics.org/cws/article/research/30702 - Published by Optics, Aug 1, 2007.
[80] Research news in Nanotechweb.org, ‘Fibre laser
boosts nanoparticle production’,
Link: http://nanotechweb.org/cws/article/tech/30709 - Published by Nanotechweb, Aug 2,
2007.